<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE campaignloader PUBLIC "-//TESTING TECH//DTD MLF//1.7" "mlf.dtd">
<!-- This file has been automatically generated by TTworkbench, TTthreeCompiler v1.4.19 build 2011.03.23.13.39 on Mon Jan 30 05:30:43 EST 2012 -->
<campaignloader>
  <campaign Control="false" Name="SUPL 2.0 Validations for PVG meeting.clf">
    <testadapter File="" Name="com.testingtech.ttcn.tri.PluginTestAdapter">
      <description></description>
    </testadapter>
    <module File="ttcn3build/SUPL_V2_SLP_INITIATED_Tests.jar" Name="SUPL_V2_SLP_INITIATED_Tests" Package="generated_ttcn" />
    <module File="ttcn3build/SUPL_V2_COMMON_Tests.jar" Name="SUPL_V2_COMMON_Tests" Package="generated_ttcn" />
    <module File="ttcn3build/SUPL_V2_SET_INITIATED_Tests.jar" Name="SUPL_V2_SET_INITIATED_Tests" Package="generated_ttcn" />
    <module File="ttcn3build/SUPL_Parameters.jar" Name="SUPL_Parameters" Package="generated_ttcn" />
    <module File="ttcn3build/SUPL_V2_Parameters.jar" Name="SUPL_V2_Parameters" Package="generated_ttcn" />
    <parameter Name="SUPL_IXIT_Items">
      <description></description>
      <parameter Module="SUPL_Parameters" Name="ics_TestAutomation">
        <description>(boolean) If set, Tester sends MMI commands over MMI port</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>false</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>false</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_Parameters" ModuleOfTypeDecl="SUPL_TypeDefinitions" Name="ixit_GpsDataAutomation">
        <description>(GPSAutomationType) Tester sends GPS commands to MMI or Automation Interface</description>
        <type>GPSAutomationType</type>
        <value><![CDATA[<Values:enumerated type="GPSAutomationType" module="SUPL_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>OFF</Values:value></Values:enumerated>
]]></value>
        <default><![CDATA[<Values:enumerated type="GPSAutomationType" module="SUPL_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>OFF</Values:value></Values:enumerated>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_Parameters" Name="ics_NetworkInitiated">
        <description>Any Network Initiated call flow supported</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_Parameters" Name="ics_SETInitiated">
        <description>Any SET Initiated call flow supported</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Name="SLP">
        <description></description>
        <parameter Module="SUPL_Parameters" ModuleOfTypeDecl="SUPL_CommonSteps" Name="ixit_H_SLP_IP_TYPE">
          <description>(slpSessionIdFormat) IP address type for SLP</description>
          <type>slpSessionIdFormat</type>
          <value><![CDATA[<Values:enumerated type="slpSessionIdFormat" module="SUPL_CommonSteps" xmlns:Values="Values.xsd"><Values:value>slpSessionIdIPv4</Values:value></Values:enumerated>
]]></value>
          <default><![CDATA[<Values:enumerated type="slpSessionIdFormat" module="SUPL_CommonSteps" xmlns:Values="Values.xsd"><Values:value>slpSessionIdIPv4</Values:value></Values:enumerated>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ixit_H_SLP_FQDN">
          <description>(charstring) FQDN for SLP</description>
          <type>charstring</type>
          <value><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value>www.spirent-lcs.com</Values:value></Values:charstring>
]]></value>
          <default><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value>www.openmobilealliance.com</Values:value></Values:charstring>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ixit_H_SLP_IPv4">
          <description>(charstring) IPv4 address for SLP</description>
          <type>charstring</type>
          <value><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value>192.168.0.35</Values:value></Values:charstring>
]]></value>
          <default><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value>192.168.0.35</Values:value></Values:charstring>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ixit_H_SLP_IPv6">
          <description>(charstring) IPv6 address for SLP</description>
          <type>charstring</type>
          <value><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value>fd00:0:20:1:0:0:0:4</Values:value></Values:charstring>
]]></value>
          <default><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value>fd00:0:20:1:0:0:0:4</Values:value></Values:charstring>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ixit_BSF_FQDN">
          <description>(charstring) BSF FQDN</description>
          <type>charstring</type>
          <value><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value>bsf.mnc001.mcc001.pub.3gppnetwork.org</Values:value></Values:charstring>
]]></value>
          <default><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value>bsf.mnc001.mcc001.pub.3gppnetwork.org</Values:value></Values:charstring>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ixit_BSF_enabled">
          <description>(boolean) enables BSF simulation.</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>false</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>false</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
      </parameter>
      <parameter Name="TransportSMS">
        <description></description>
        <parameter Module="SUPL_Parameters" Name="ics_MT_SMS">
          <description>SET supports MT SMS</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_WapPush">
          <description>SET supports WapPush</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" ModuleOfTypeDecl="SUPL_TypeDefinitions" Name="ixit_MTTransport">
          <description>(MTTransport) Transport channel for SUPL INIT message</description>
          <type>MTTransport</type>
          <value><![CDATA[<Values:enumerated type="MTTransport" module="SUPL_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>WAP_Push_Connectionless</Values:value></Values:enumerated>
]]></value>
          <default><![CDATA[<Values:enumerated type="MTTransport" module="SUPL_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>MT_SMS</Values:value></Values:enumerated>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
      </parameter>
      <parameter Name="PositioningMethods">
        <description></description>
        <parameter Module="SUPL_Parameters" ModuleOfTypeDecl="SUPL_TypeDefinitions" Name="ixit_PositioningProtocol">
          <description>(PositioningProtocol) Positioning Protocol to be used</description>
          <type>PositioningProtocol</type>
          <value><![CDATA[<Values:enumerated type="PositioningProtocol" module="SUPL_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>RRLP</Values:value></Values:enumerated>
]]></value>
          <default><![CDATA[<Values:enumerated type="PositioningProtocol" module="SUPL_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>RRLP</Values:value></Values:enumerated>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" ModuleOfTypeDecl="SUPL_TypeDefinitions" Name="ixit_RRLP_Version">
          <description>(RRLP_Version_Enum) RRLP version to be used</description>
          <type>RRLP_Version_Enum</type>
          <value><![CDATA[<Values:enumerated type="RRLP_Version_Enum" module="SUPL_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>e_RRLP_V5</Values:value></Values:enumerated>
]]></value>
          <default><![CDATA[<Values:enumerated type="RRLP_Version_Enum" module="SUPL_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>e_RRLP_V5</Values:value></Values:enumerated>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_AGPSSETassisted_SET_initiated">
          <description>(boolean) UE supports A-GPS SET assited Positioning Method (SET initiated)</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_AGPSSETassisted_Network_initiated">
          <description>UE supports A-GPS SET assited Positioning Method (Network initiated)</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_AGPSSETbased_SET_initiated">
          <description>(boolean) UE supports A-GPS SET based Positioning Method (SET initiated)</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_AGPSSETbased_Network_initiated">
          <description>(boolean) UE supports A-GPS SET based Positioning Method (Network initiated)</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_autonomousGPS_SET_initiated">
          <description>UE supports autonomous GPS Positioning Method in SET initiated session</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_autonomousGPS_Network_initiated">
          <description>(boolean) UE supports autonomous GPS Positioning Method in Network initiated session</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_aFLT">
          <description>(boolean) UE supports aFLT Positioning Method</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>false</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_eCID_SET_initiated">
          <description>UE supports eCID Positioning Method (SET initiated).</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_eCID_Network_initiated">
          <description>(boolean) UE supports eCID Positioning Method (Network initiated</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_eOTD">
          <description>(boolean) UE supports eOTD Positioning Method</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>false</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_oTDOA">
          <description>(boolean) UE supports oTDOA Positioning Method</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>false</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
      </parameter>
      <parameter Name="Timer">
        <description></description>
        <parameter Module="SUPL_Parameters" Name="ixit_timer_UT1">
          <description>(integer) value of Timer UT1, default = 10s</description>
          <type>integer</type>
          <value><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ixit_timer_UT2">
          <description>(integer) value of Timer UT2, default = 10s</description>
          <type>integer</type>
          <value><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ixit_timer_UT3">
          <description>(integer) value of Timer UT3, default = 10s</description>
          <type>integer</type>
          <value><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ixit_timer_UT4">
          <description>value of Timer UT4, default = 10s</description>
          <type>integer</type>
          <value><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ixit_timer_UT5">
          <description>value of Timer UT5, default = 10s</description>
          <type>integer</type>
          <value><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ixit_verification_timeout">
          <description>Value of Verification timeout</description>
          <type>integer</type>
          <value><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>40</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>40</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
      </parameter>
      <parameter Name="Securtiy">
        <description></description>
        <parameter Module="SUPL_Parameters" ModuleOfTypeDecl="SUPL_Configuration" Name="ixit_TLS_Version">
          <description>(TlsVersionConfig) used TLS Version. For Compliance with SUPL 2.0 TS, this ixit MUST be set to TLS 1.1</description>
          <type>TlsVersionConfig</type>
          <value><![CDATA[<Values:enumerated type="TlsVersionConfig" module="SUPL_Configuration" xmlns:Values="Values.xsd"><Values:value>TLS1_0</Values:value></Values:enumerated>
]]></value>
          <default><![CDATA[<Values:enumerated type="TlsVersionConfig" module="SUPL_Configuration" xmlns:Values="Values.xsd"><Values:value>TLS1_1</Values:value></Values:enumerated>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" ModuleOfTypeDecl="SUPL_TypeDefinitions" Name="ixit_CipherSuite">
          <description>(CipherSuites) used cipher suite</description>
          <type>CipherSuites</type>
          <value><![CDATA[<Values:enumerated type="CipherSuites" module="SUPL_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>TLS_RSA_WITH_AES_128_CBC_SHA</Values:value></Values:enumerated>
]]></value>
          <default><![CDATA[<Values:enumerated type="CipherSuites" module="SUPL_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>TLS_RSA_WITH_AES_128_CBC_SHA</Values:value></Values:enumerated>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" ModuleOfTypeDecl="SUPL_TypeDefinitions" Name="ixit_CertificationVersion">
          <description>(CertificateVersions) used certificate version</description>
          <type>CertificateVersions</type>
          <value><![CDATA[<Values:enumerated type="CertificateVersions" module="SUPL_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>X509v1</Values:value></Values:enumerated>
]]></value>
          <default><![CDATA[<Values:enumerated type="CertificateVersions" module="SUPL_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>X509v1</Values:value></Values:enumerated>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_PSK_TLS">
          <description>(bollean) SET supports TLS/PSK</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>false</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>false</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ixit_PSK_remote_IP">
          <description>(cahrstring) SET PSK Remote IP</description>
          <type>charstring</type>
          <value><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value>127.0.0.1</Values:value></Values:charstring>
]]></value>
          <default><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value>127.0.0.1</Values:value></Values:charstring>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ixit_OrganizationOctet">
          <description>(octetstring) sed for PSK generation in Value NAF_Id</description>
          <type>octetstring</type>
          <value><![CDATA[<Values:octetstring type="octetstring" xmlns:Values="Values.xsd"><Values:value>01</Values:value></Values:octetstring>
]]></value>
          <default><![CDATA[<Values:octetstring type="octetstring" xmlns:Values="Values.xsd"><Values:value>01</Values:value></Values:octetstring>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" ModuleOfTypeDecl="BSF_XML_TypeDefinitions" Name="ixit_GBA_mode">
          <description>(GBAType) Specifies the supperted GBA algorithm in the DUT</description>
          <type>GBAType</type>
          <value><![CDATA[<Values:enumerated type="GBAType" module="BSF_XML_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>e_gba_u</Values:value></Values:enumerated>
]]></value>
          <default><![CDATA[<Values:enumerated type="GBAType" module="BSF_XML_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>e_gba_u</Values:value></Values:enumerated>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" ModuleOfTypeDecl="SUPL_TypeDefinitions" Name="ixit_VER_HMACHash">
          <description>(HMACHash) used HMAC hash function for calculating VER. For Compliance with SUPL 2.0 TS, this ixit MUST be set to SHA256</description>
          <type>HMACHash</type>
          <value><![CDATA[<Values:enumerated type="HMACHash" module="SUPL_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>SHA1</Values:value></Values:enumerated>
]]></value>
          <default><![CDATA[<Values:enumerated type="HMACHash" module="SUPL_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>SHA256</Values:value></Values:enumerated>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
      </parameter>
      <parameter Name="SIM">
        <description></description>
        <parameter Module="SUPL_Parameters" Name="ixit_IMPI_ISIM">
          <description>(charstring) IMPI for I-SIM</description>
          <type>charstring</type>
          <value><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value>user1-private@operator.com</Values:value></Values:charstring>
]]></value>
          <default><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value>user1-private@operator.com</Values:value></Values:charstring>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ixit_IMPI_USIM">
          <description>(charstring) IMPI for U-SIM</description>
          <type>charstring</type>
          <value><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value>001010123456063@ims.mnc001.mcc001.pub.3gppnetwork.org</Values:value></Values:charstring>
]]></value>
          <default><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value>001010123456063@ims.mnc001.mcc001.pub.3gppnetwork.org</Values:value></Values:charstring>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" ModuleOfTypeDecl="SUPL_TypeDefinitions" Name="ixit_usedSIM">
          <description>(Sims) SET has following SIM</description>
          <type>Sims</type>
          <value><![CDATA[<Values:enumerated type="Sims" module="SUPL_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>USIM</Values:value></Values:enumerated>
]]></value>
          <default><![CDATA[<Values:enumerated type="Sims" module="SUPL_TypeDefinitions" xmlns:Values="Values.xsd"><Values:value>USIM</Values:value></Values:enumerated>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
      </parameter>
      <parameter Name="Auth">
        <description></description>
        <parameter Module="SUPL_Parameters" ModuleOfTypeDecl="LibCommon_DataStrings" Name="ixit_AuthAMF">
          <description>(Bit16) Authentication Management Field (16 bits)</description>
          <type>Bit16</type>
          <value><![CDATA[<Values:bitstring type="Bit16" module="LibCommon_DataStrings" xmlns:Values="Values.xsd"><Values:value>0000000000000000</Values:value></Values:bitstring>
]]></value>
          <default><![CDATA[<Values:bitstring type="Bit16" module="LibCommon_DataStrings" xmlns:Values="Values.xsd"><Values:value>0000000000000000</Values:value></Values:bitstring>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" ModuleOfTypeDecl="LibCommon_DataStrings" Name="ixit_AuthK">
          <description>(Bit128) Authentication Key (128 bits)</description>
          <type>Bit128</type>
          <value><![CDATA[<Values:bitstring type="Bit128" module="LibCommon_DataStrings" xmlns:Values="Values.xsd"><Values:value>00000000000000010000001000000011000001000000010100000110000001110000100000001001000010100000101100001100000011010000111000001111</Values:value></Values:bitstring>
]]></value>
          <default><![CDATA[<Values:bitstring type="Bit128" module="LibCommon_DataStrings" xmlns:Values="Values.xsd"><Values:value>00000000000000010000001000000011000001000000010100000110000001110000100000001001000010100000101100001100000011010000111000001111</Values:value></Values:bitstring>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ixit_AuthN">
          <description>(integer) min 31, max 127 (TS 34_108 cl 8_1_2) default = 127</description>
          <type>integer</type>
          <value><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>127</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>127</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" ModuleOfTypeDecl="LibCommon_DataStrings" Name="ixit_AuthRAND">
          <description>(Bit128) Authentication / Random challenge (128 bits)</description>
          <type>Bit128</type>
          <value><![CDATA[<Values:bitstring type="Bit128" module="LibCommon_DataStrings" xmlns:Values="Values.xsd"><Values:value>01010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101</Values:value></Values:bitstring>
]]></value>
          <default><![CDATA[<Values:bitstring type="Bit128" module="LibCommon_DataStrings" xmlns:Values="Values.xsd"><Values:value>01010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101</Values:value></Values:bitstring>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
      </parameter>
      <parameter Name="SET">
        <description></description>
        <parameter Module="SUPL_Parameters" Name="ics_SET_supportSLPInitPosReq">
          <description>SET supports Position Request from SLP in SET initiated SUPL session.</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
      </parameter>
      <parameter Name="notificatioin">
        <description></description>
        <parameter Module="SUPL_Parameters" Name="ics_notification">
          <description>SET support notification</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_notification_currentLocation">
          <description>SET support notification with current location</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_UE_support_formatIndicator_logicalName">
          <description>SUPL INIT -&gt; notification format indicator &apos;logical name&apos; is supported</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_UE_support_formatIndicator_eMailAddress">
          <description>SUPL INIT -&gt; notification format indicator &apos;email address&apos; is supported</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_UE_support_formatIndicator_MSISDN">
          <description>SUPL INIT -&gt; notification format indicator &apos;MSISDN&apos; is supported</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_UE_support_formatIndicator_URL">
          <description>SUPL INIT -&gt; notification format indicator &apos;URL&apos; is supported</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_UE_support_formatIndicator_SIPURL">
          <description>SUPL INIT -&gt; notification format indicator &apos;SIPURL&apos; is supported</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_UE_support_formatIndicator_MIN">
          <description>SUPL INIT -&gt; notification format indicator &apos;MIN&apos; is supported</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_UE_support_formatIndicator_MDN">
          <description>SUPL INIT -&gt; notification format indicator &apos;MDN&apos; is supported</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_UE_support_formatIndicator_IMSPublicIdentity">
          <description>SUPL INIT -&gt; notification format indicator &apos;IMS public identity&apos; is supported</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_charEncoding_UCS2">
          <description>UE supports UCS2 character encoding format.</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_charEncoding_UTF8">
          <description>UE supports UTF-8 character encoding format.</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_Parameters" Name="ics_charEncoding_GSM">
          <description>UE supports GSM default (see 23.038) character encoding format.</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
      </parameter>
    </parameter>
    <parameter Name="suplIxitItemsGroup">
      <description></description>
      <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPL_V2_Parameters" Name="ixit_gANSS">
        <description>(boolean galileo, boolean gloneass) GANSS technology supported</description>
        <type>gANSStechnology</type>
        <value><![CDATA[<Values:record type="gANSStechnology" module="SUPL_V2_Parameters" xmlns:Values="Values.xsd"><Values:boolean type="boolean" name="galileo"><Values:value>false</Values:value></Values:boolean><Values:boolean type="boolean" name="gloneass"><Values:value>false</Values:value></Values:boolean></Values:record>
]]></value>
        <default><![CDATA[<Values:record type="gANSStechnology" module="SUPL_V2_Parameters" xmlns:Values="Values.xsd"><Values:boolean type="boolean" name="galileo"><Values:value>false</Values:value></Values:boolean><Values:boolean type="boolean" name="gloneass"><Values:value>false</Values:value></Values:boolean></Values:record>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPL_V2_Parameters" Name="ixit_NwcDataAutomation">
        <description>(NwcAutomationType) Tester sends NWC commands to MMI or Automation Interface</description>
        <type>NwcAutomationType</type>
        <value><![CDATA[<Values:enumerated type="NwcAutomationType" module="SUPL_V2_Parameters" xmlns:Values="Values.xsd"><Values:value>AutomationManager</Values:value></Values:enumerated>
]]></value>
        <default><![CDATA[<Values:enumerated type="NwcAutomationType" module="SUPL_V2_Parameters" xmlns:Values="Values.xsd"><Values:value>OFF</Values:value></Values:enumerated>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPL_V2_Parameters" Name="ixit_SscDataAutomation">
        <description>(NwcAutomationType) Tester sends SSC commands to MMI or Automation Interface</description>
        <type>SscAutomationType</type>
        <value><![CDATA[<Values:enumerated type="SscAutomationType" module="SUPL_V2_Parameters" xmlns:Values="Values.xsd"><Values:value>AutomationManager</Values:value></Values:enumerated>
]]></value>
        <default><![CDATA[<Values:enumerated type="SscAutomationType" module="SUPL_V2_Parameters" xmlns:Values="Values.xsd"><Values:value>OFF</Values:value></Values:enumerated>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ixit_emergency_call_required">
        <description>(ixit_emergency_call_required) SET requires emergency call to accept Emergency Services Location Request</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>false</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>false</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ixit_DEFAULT_NWC_ACTION_MAX_DELAY">
        <description>(float) Default max delay for NWC actions (over nwcPort interface)</description>
        <type>float</type>
        <value><![CDATA[<Values:float type="float" xmlns:Values="Values.xsd"><Values:value>2.0</Values:value></Values:float>
]]></value>
        <default><![CDATA[<Values:float type="float" xmlns:Values="Values.xsd"><Values:value>2.0</Values:value></Values:float>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="RRLPV5Types" Name="ixit_DEFAULT_MS_BASED_ACCURACY_V5">
        <description>(Integer 1-127) Default accuracy value for MS Based method type</description>
        <type>Accuracy</type>
        <value><![CDATA[<Values:integer type="Accuracy" module="RRLPV5Types" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></value>
        <default><![CDATA[<Values:integer type="Accuracy" module="RRLPV5Types" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="RRLP_Components_V10" Name="ixit_DEFAULT_MS_BASED_ACCURACY_V10">
        <description>Default accuracy value for MS Based method type</description>
        <type>Accuracy</type>
        <value><![CDATA[<Values:integer type="Accuracy" module="RRLP_Components_V10" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></value>
        <default><![CDATA[<Values:integer type="Accuracy" module="RRLP_Components_V10" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_ESLP_FQDN">
        <description>E-SLP (FQDN) for emergency services</description>
        <type>FQDN</type>
        <value><![CDATA[<Values:charstring type="FQDN" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>e-slp.spirent-lcs.com</Values:value></Values:charstring>
]]></value>
        <default><![CDATA[<Values:charstring type="FQDN" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>e-slp.spirent-lcs.com</Values:value></Values:charstring>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_Default_ESLP_FQDN">
        <description>Default E-SLP (FQDN) for emergency services</description>
        <type>FQDN</type>
        <value><![CDATA[<Values:charstring type="FQDN" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>e-slp.mnc001.mcc001.pub.3gppnetwork.org</Values:value></Values:charstring>
]]></value>
        <default><![CDATA[<Values:charstring type="FQDN" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>e-slp.mnc001.mcc001.pub.3gppnetwork.org</Values:value></Values:charstring>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ixit_ESLP_IPversion">
        <description>E-SLP (IPversion) for emergency services</description>
        <type>integer</type>
        <value><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>4</Values:value></Values:integer>
]]></value>
        <default><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>4</Values:value></Values:integer>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_ESLP_IPv4Address">
        <description>E-SLP (IPv4Address) for emergency services</description>
        <type>IPAddress</type>
        <value><![CDATA[<Values:union type="IPAddress" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:octetstring type="_0IPAddress" module="SUPLTypes" name="ipv4Address"><Values:value>01020304</Values:value></Values:octetstring></Values:union>
]]></value>
        <default><![CDATA[<Values:union type="IPAddress" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:octetstring type="_0IPAddress" module="SUPLTypes" name="ipv4Address"><Values:value>01020304</Values:value></Values:octetstring></Values:union>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_ESLP_IPv6Address">
        <description>E-SLP (IPv6Address) for emergency services</description>
        <type>IPAddress</type>
        <value><![CDATA[<Values:union type="IPAddress" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:octetstring type="_0IPAddress0" module="SUPLTypes" name="ipv6Address"><Values:value>000102030405060708090A0B0C0D0E0F</Values:value></Values:octetstring></Values:union>
]]></value>
        <default><![CDATA[<Values:union type="IPAddress" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:octetstring type="_0IPAddress0" module="SUPLTypes" name="ipv6Address"><Values:value>000102030405060708090A0B0C0D0E0F</Values:value></Values:octetstring></Values:union>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ixit_Default_ESLP_IPversion">
        <description>Default E-SLP (IPversion) for emergency services</description>
        <type>integer</type>
        <value><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>4</Values:value></Values:integer>
]]></value>
        <default><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>4</Values:value></Values:integer>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_Default_ESLP_IPv4Address">
        <description>Default E-SLP (IPv4Address) for emergency services</description>
        <type>IPAddress</type>
        <value><![CDATA[<Values:union type="IPAddress" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:octetstring type="_0IPAddress" module="SUPLTypes" name="ipv4Address"><Values:value>01020304</Values:value></Values:octetstring></Values:union>
]]></value>
        <default><![CDATA[<Values:union type="IPAddress" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:octetstring type="_0IPAddress" module="SUPLTypes" name="ipv4Address"><Values:value>01020304</Values:value></Values:octetstring></Values:union>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_Default_ESLP_IPv6Address">
        <description>Default E-SLP (IPv6Address) for emergency services</description>
        <type>IPAddress</type>
        <value><![CDATA[<Values:union type="IPAddress" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:octetstring type="_0IPAddress0" module="SUPLTypes" name="ipv6Address"><Values:value>000102030405060708090A0B0C0D0E0F</Values:value></Values:octetstring></Values:union>
]]></value>
        <default><![CDATA[<Values:union type="IPAddress" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:octetstring type="_0IPAddress0" module="SUPLTypes" name="ipv6Address"><Values:value>000102030405060708090A0B0C0D0E0F</Values:value></Values:octetstring></Values:union>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ixit_Default_SUPL_INIT_ROOT_KEY">
        <description>Default (charstring) SUPL_INIT_ROOT_KEY</description>
        <type>charstring</type>
        <value><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value>default SUPL INIT ROOT KEY</Values:value></Values:charstring>
]]></value>
        <default><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value>default SUPL INIT ROOT KEY</Values:value></Values:charstring>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Name="triggerParamsGroup">
        <description></description>
        <parameter Module="SUPL_V2_Parameters" Name="ixit_numberOfFixes">
          <description>(integer) Number of Fixes of Periodic Params (TriggerParams) in TRIGGERED RESPONSE</description>
          <type>integer</type>
          <value><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>50</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>50</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" Name="ixit_intervalBetweenFixes">
          <description>(integer) interval between Fixes of Periodic Params (TriggerParams) in TRIGGERED RESPONSE</description>
          <type>integer</type>
          <value><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>60</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>60</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" Name="ixit_startTime">
          <description>(integer) start time of Periodic Params (TriggerParams) in TRIGGERED RESPONSE</description>
          <type>integer</type>
          <value><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>30</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>30</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPL_V2_Parameters" Name="ixit_CELL_TYPE">
          <description>(enumeration) handover refers to which cells (cp tests 051 and 131)</description>
          <type>CellType</type>
          <value><![CDATA[<Values:enumerated type="CellType" module="SUPL_V2_Parameters" xmlns:Values="Values.xsd"><Values:value>WCDMA</Values:value></Values:enumerated>
]]></value>
          <default><![CDATA[<Values:enumerated type="CellType" module="SUPL_V2_Parameters" xmlns:Values="Values.xsd"><Values:value>WCDMA</Values:value></Values:enumerated>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_TEST_GSM_CELL_ID">
          <description>(integer 0-999) GSM Cell ID used for testing</description>
          <type>_0GSMAreaId0</type>
          <value><![CDATA[<Values:integer type="_0GSMAreaId0" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>0</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="_0GSMAreaId0" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>0</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_TEST_WCDMA_CELL_ID">
          <description>(integer 0-999) WCDMA ID used for testing</description>
          <type>_0WCDMAAreaId0</type>
          <value><![CDATA[<Values:integer type="_0WCDMAAreaId0" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>0</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="_0WCDMAAreaId0" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>0</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_TEST_LTE_CELL_ID">
          <description>(BIT STRING(SIZE (29))) LTE ID used for testing</description>
          <type>_0LTEAreaId1</type>
          <value><![CDATA[<Values:bitstring type="_0LTEAreaId1" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>00000000000000000000000000001</Values:value></Values:bitstring>
]]></value>
          <default><![CDATA[<Values:bitstring type="_0LTEAreaId1" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>00000000000000000000000000001</Values:value></Values:bitstring>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_TEST_CDMA_CELL_ID">
          <description>refBASEID      INTEGER(0..65535) OPTIONAL, -- Base Station Id</description>
          <type>_0CDMAAreaId1</type>
          <value><![CDATA[<Values:integer type="_0CDMAAreaId1" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>0</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="_0CDMAAreaId1" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>0</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_TEST_HRPD_CELL_ID">
          <description>refSECTORID    BIT STRING(SIZE (128)), -- HRPD Sector Id</description>
          <type>_0HRPDAreaId</type>
          <value><![CDATA[<Values:bitstring type="_0HRPDAreaId" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</Values:value></Values:bitstring>
]]></value>
          <default><![CDATA[<Values:bitstring type="_0HRPDAreaId" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</Values:value></Values:bitstring>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
      </parameter>
      <parameter Name="BatchReport">
        <description></description>
        <parameter Module="SUPL_V2_Parameters" Name="ixit_BatchReportingAfterNumOfFixes">
          <description>(integer) Batch report after after a number of fixes per measurements (Batch report Params) in TRIGGERED RESPONSE</description>
          <type>integer</type>
          <value><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>8</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>8</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" Name="ixit_BatchReportingAfterNumOfMinutes">
          <description>(integer) Batch report after a number of minutes per measurements (Batch report Params) in TRIGGERED RESPONSE</description>
          <type>integer</type>
          <value><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>5</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>5</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
      </parameter>
      <parameter Name="SET">
        <description></description>
        <parameter Module="SUPL_V2_Parameters" Name="ixit_timer_UT7">
          <description>(integer) value of Timer UT7, default = 10s</description>
          <type>integer</type>
          <value><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" Name="ixit_timer_UT8">
          <description>(integer) value of Timer UT8, default = 10s</description>
          <type>integer</type>
          <value><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="integer" xmlns:Values="Values.xsd"><Values:value>10</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_SUPL_MAJ_VERSION">
          <description>(integer 0-255) Current SUPL major version supported by this test suite</description>
          <type>_0Version</type>
          <value><![CDATA[<Values:integer type="_0Version" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>2</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="_0Version" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>2</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_SET_SERVIND_VERSION_HIGHER_THAN_SET_MAX">
          <description>(integer 0-255) SUPL servind version number higher than maximally supported by SET</description>
          <type>_0Version1</type>
          <value><![CDATA[<Values:integer type="_0Version1" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>2</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="_0Version1" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>2</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_SET_MIN_VERSION_HIGHER_THAN_SET_MAX">
          <description>(integer 0-255) SUPL min version number higher than maximally supported by SET</description>
          <type>_0Version0</type>
          <value><![CDATA[<Values:integer type="_0Version0" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>2</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="_0Version0" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>2</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_SET_SERVIND_VERSION_LOWER_THAN_SET_MAX">
          <description>(integer 0-255) SUPL servind version lower than the maximum value supported by the SET</description>
          <type>_0Version1</type>
          <value><![CDATA[<Values:integer type="_0Version1" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>1</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="_0Version1" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>1</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_SET_MIN_VERSION_LOWER_THAN_SET_MAX">
          <description>(integer 0-255) SUPL min version lower than the maximum value supported by the SET</description>
          <type>_0Version0</type>
          <value><![CDATA[<Values:integer type="_0Version0" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>1</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="_0Version0" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>1</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_SET_MAJ_VERSION">
          <description>(integer 0-255) The maj version number supported by the SET</description>
          <type>_0Version</type>
          <value><![CDATA[<Values:integer type="_0Version" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>2</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="_0Version" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>2</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_SET_SERVIND_VERSION">
          <description>(integer 0-255) A server ind version number higher than the one supported by the SUT</description>
          <type>_0Version1</type>
          <value><![CDATA[<Values:integer type="_0Version1" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>0</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="_0Version1" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>0</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_SET_SERVIND_VERSION_V1">
          <description>(integer 0-255) A server ind version number higher than the one supported by the SUT (if SUPL V1 selected)</description>
          <type>_0Version1</type>
          <value><![CDATA[<Values:integer type="_0Version1" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>0</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="_0Version1" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>0</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_SET_MIN_VERSION">
          <description>(integer 0-255) SUPL min version number supported by the SET</description>
          <type>_0Version1</type>
          <value><![CDATA[<Values:integer type="_0Version1" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>0</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="_0Version1" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>0</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_SET_MIN_VERSION_V1">
          <description>(integer 0-255) SUPL min version number supported by the SET (if SUPL V1 selected)</description>
          <type>_0Version1</type>
          <value><![CDATA[<Values:integer type="_0Version1" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>0</Values:value></Values:integer>
]]></value>
          <default><![CDATA[<Values:integer type="_0Version1" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:value>0</Values:value></Values:integer>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_SET_REPORTING_CAP">
          <description>(ReportingCap) Reporting Capabilities supported by the SET</description>
          <type>ReportingCap</type>
          <value><![CDATA[<Values:record type="ReportingCap" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:integer type="_0ReportingCap" module="SUPLTypes" name="minInt"><Values:value>1</Values:value></Values:integer><Values:integer type="_0ReportingCap0" module="SUPLTypes" name="maxInt"><Values:value>1440</Values:value></Values:integer><Values:record type="RepMode" module="SUPLTypes" name="repMode"><Values:boolean type="boolean" name="realtime"><Values:value>true</Values:value></Values:boolean><Values:boolean type="boolean" name="quasirealtime"><Values:value>false</Values:value></Values:boolean><Values:boolean type="boolean" name="batch"><Values:value>false</Values:value></Values:boolean></Values:record><Values:record type="BatchRepCap" module="SUPLTypes" name="batchRepCap"><Values:omit /></Values:record></Values:record>
]]></value>
          <default><![CDATA[<Values:record type="ReportingCap" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:integer type="_0ReportingCap" module="SUPLTypes" name="minInt"><Values:value>1</Values:value></Values:integer><Values:integer type="_0ReportingCap0" module="SUPLTypes" name="maxInt"><Values:value>1</Values:value></Values:integer><Values:record type="RepMode" module="SUPLTypes" name="repMode"><Values:boolean type="boolean" name="realtime"><Values:value>true</Values:value></Values:boolean><Values:boolean type="boolean" name="quasirealtime"><Values:value>true</Values:value></Values:boolean><Values:boolean type="boolean" name="batch"><Values:value>true</Values:value></Values:boolean></Values:record><Values:record type="BatchRepCap" module="SUPLTypes" name="batchRepCap"><Values:boolean type="boolean" name="report_position"><Values:value>true</Values:value></Values:boolean><Values:boolean type="boolean" name="report_measurements"><Values:value>true</Values:value></Values:boolean><Values:integer type="_0BatchRepCap" module="SUPLTypes" name="max_num_positions"><Values:value>1</Values:value></Values:integer><Values:integer type="_0BatchRepCap0" module="SUPLTypes" name="max_num_measurements"><Values:value>1</Values:value></Values:integer></Values:record></Values:record>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_SET_SERVICE_SUPPORTED">
          <description>(serviceSupported) service supported by the SET</description>
          <type>ServicesSupported</type>
          <value><![CDATA[<Values:record type="ServicesSupported" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:boolean type="boolean" name="periodicTrigger"><Values:value>true</Values:value></Values:boolean><Values:boolean type="boolean" name="areaEventTrigger"><Values:value>true</Values:value></Values:boolean></Values:record>
]]></value>
          <default><![CDATA[<Values:record type="ServicesSupported" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:boolean type="boolean" name="periodicTrigger"><Values:value>true</Values:value></Values:boolean><Values:boolean type="boolean" name="areaEventTrigger"><Values:value>true</Values:value></Values:boolean></Values:record>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" ModuleOfTypeDecl="SUPLTypes" Name="ixit_SET_EVENTTRIGGER_CAP">
          <description>(EventTriggerCap)Event Trigger Capabilities supported by the SET</description>
          <type>EventTriggerCapabilities</type>
          <value><![CDATA[<Values:record type="EventTriggerCapabilities" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:record type="GeoAreaShapesSupported" module="SUPLTypes" name="geoAreaShapesSupported"><Values:boolean type="boolean" name="ellipticalArea"><Values:value>false</Values:value></Values:boolean><Values:boolean type="boolean" name="polygonArea"><Values:value>false</Values:value></Values:boolean></Values:record><Values:integer type="_0EventTriggerCapabilities" module="SUPLTypes" name="maxNumGeoAreaSupported"><Values:value>3</Values:value></Values:integer><Values:integer type="_0EventTriggerCapabilities0" module="SUPLTypes" name="maxAreaIdListSupported"><Values:value>6</Values:value></Values:integer><Values:integer type="_0EventTriggerCapabilities1" module="SUPLTypes" name="maxAreaIdSupportedPerList"><Values:value>256</Values:value></Values:integer></Values:record>
]]></value>
          <default><![CDATA[<Values:record type="EventTriggerCapabilities" module="SUPLTypes" xmlns:Values="Values.xsd"><Values:record type="GeoAreaShapesSupported" module="SUPLTypes" name="geoAreaShapesSupported"><Values:boolean type="boolean" name="ellipticalArea"><Values:value>false</Values:value></Values:boolean><Values:boolean type="boolean" name="polygonArea"><Values:value>false</Values:value></Values:boolean></Values:record><Values:integer type="_0EventTriggerCapabilities" module="SUPLTypes" name="maxNumGeoAreaSupported"><Values:value>3</Values:value></Values:integer><Values:integer type="_0EventTriggerCapabilities0" module="SUPLTypes" name="maxAreaIdListSupported"><Values:value>6</Values:value></Values:integer><Values:integer type="_0EventTriggerCapabilities1" module="SUPLTypes" name="maxAreaIdSupportedPerList"><Values:value>256</Values:value></Values:integer></Values:record>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ixit_SIP_push_user">
        <description>(charstring) SIP push method request, user</description>
        <type>charstring</type>
        <value><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value></Values:value></Values:charstring>
]]></value>
        <default><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value></Values:value></Values:charstring>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ixit_SIP_push_host">
        <description>(charstring) SIP push method request, host</description>
        <type>charstring</type>
        <value><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value></Values:value></Values:charstring>
]]></value>
        <default><![CDATA[<Values:charstring type="charstring" xmlns:Values="Values.xsd"><Values:value></Values:value></Values:charstring>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
    </parameter>
    <parameter Name="suplIcsItemsGroup">
      <description></description>
      <parameter Module="SUPL_V2_Parameters" Name="ics_AGANSSSETassisted_Galileo_Network_initiated">
        <description>(boolean) UE supports A-GANSS SET assited Galileo Positioning Method (Network initiated)</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_AGANSSSETbased_Galileo_Network_initiated">
        <description>(boolean) UE supports A-GANSS SET based Galileo Positioning Method (Network initiated)</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_AGANSSSETassisted_GLONASS_Network_initiated">
        <description>(boolean) UE supports A-GANSS SET assited GLONASS Positioning Method (Network initiated)</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_AGANSSSETbased_GLONASS_Network_initiated">
        <description>(boolean) UE supports A-GANSS SET based GLONASS Positioning Method (Network initiated)</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_autonomousGANSS_Network_initiated">
        <description>(boolean) UE supports autonomous GNSS Positioning Method in Network initiated session</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_AGANSSSETassisted_GLONASS_SET_initiated">
        <description>(boolean) UE supports A-GANSS SET assited GLONASS Positioning Method in SET initiated session</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_AGANSSSETbased_GLONASS_SET_initiated">
        <description>(boolean) UE supports A-GANSS SET based GLONASS Positioning Method in SET initiated session</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_autonomousGANSS_SET_initiated">
        <description>(boolean) UE supports autonomous GNSS Positioning Method in SET initiated session</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_AGANSSSETassisted_Galileo_SET_initiated">
        <description>(boolean) UE supports SET assisted A-GANSS Positioning Method in SET initiated session</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_AGANSSSETbased_Galileo_SET_initiated">
        <description>(boolean) UE supports SET based A-GANSS Positioning Method in SET initiated session</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_AreaEvent_Network_initiated">
        <description>(boolean) Area Event Triggered Service in Network initiated call flows supported</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_periodic_Network_initiated">
        <description>(boolean) Periodic trigger in Network initiated call flows supported</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_stop_triggered_session">
        <description>(boolean) Ability to stop Triggered Location Session supported</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_event_Network_initiated">
        <description>(boolean) Area Event Triggered Service in Network initiated call flows supported</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_periodic_SET_initiated">
        <description>(boolean) Periodic trigger in SET initiated call flows supported</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>false</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>false</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_event_SET_initiated">
        <description>(boolean) Area Event Triggered Service in SET initiated call flows supported</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>false</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>false</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_real_time">
        <description>(boolean) Real time reporting supported</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_GeoTargetArea">
        <description>(boolean) Geographic Target Area supported</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_AreaId">
        <description>(boolean) Area Id supported</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_AreaEvent_SET_initiated">
        <description>(boolean) Area Event initiated at SET</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="icsStopTimeSupport">
        <description>(boolean) True, if SUT supports Stop Time</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="icsStartTimeSupport">
        <description>(boolean) True, if SUT supports Start Time</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_support_SUPLV1">
        <description>(boolean) True, if SUT supports SUPL V1_0</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Module="SUPL_V2_Parameters" Name="ics_batch">
        <description>(boolean) Basic Batch reporting supported</description>
        <type>boolean</type>
        <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
        <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
        <presentation>
          <plain />
        </presentation>
      </parameter>
      <parameter Name="TransportSMS">
        <description></description>
        <parameter Module="SUPL_V2_Parameters" Name="ics_SipPush">
          <description>SET supports SIP Push</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
        <parameter Module="SUPL_V2_Parameters" Name="ics_UDP">
          <description>SET supports UDP</description>
          <type>boolean</type>
          <value><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></value>
          <default><![CDATA[<Values:boolean type="boolean" xmlns:Values="Values.xsd"><Values:value>true</Values:value></Values:boolean>
]]></default>
          <presentation>
            <plain />
          </presentation>
        </parameter>
      </parameter>
    </parameter>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_000_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-000 - SUPL INIT delivery - Test 1: OMA Push</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_000_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-000 - SUPL INIT delivery - Test 2: MT SMS</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_000_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-000 - SUPL INIT delivery - Test 3: SIP Push</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_000_4" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly supports SUPL INIT delivery using OMA Push and, if supported, MT SMS and, or SIP Push
 Test 4: ics_UDP</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_001" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-001 - Incorrect OMA Push message content.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_002" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-002 - Incorrect MT SMS message content</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_003" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-003 - Incorrect SIP Push message content.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_004_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-004 - Correct Session ID - Test 1: SLP ID using the Parameter type IPAddress, IPv4</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_004_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-004 - Correct Session ID - Test 2: SLP ID using the Parameter type IPAddress, IPv6</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_004_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-004 - Correct Session ID - Test 3: SLP ID using the Parameter type IPAddress, FQDN</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_005" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-005 - Invalid SET Session ID</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_006" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-006 - Missing or invalid SLP Session ID</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_COMMON_Tests" Name="TC_007_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-007 - Alternative H-SLP Addresses - Test 1: H-SLP address stored on UICC</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_COMMON_Tests" Name="TC_007_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-007 - Alternative H-SLP Addresses - Test 2: H-SLP address stored on SET</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_COMMON_Tests" Name="TC_007_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-007 - Alternative H-SLP Addresses - Test 3: Auto configuration of H-SLP address</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_COMMON_Tests" Name="TC_007_4" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-007 - Alternative H-SLP Addresses - Test 4: Auto configuration of H-SLP address following authentication failure</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_COMMON_Tests" Name="TC_007_5" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-007 - Alternative H-SLP Addresses - Test 5: Clearing of old H-SLP address following change of IMSI</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_COMMON_Tests" Name="TC_008_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-008 - Optional Ciphering Suites - Test 1 - TLS_RSA_WITH_3DES_EDE_CBC_SHA</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_COMMON_Tests" Name="TC_008_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly uses optional ciphering suites
 Test 2: ics_PSKTLS_add_cipher</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_009_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly supports Basic SUPL INIT protection
 Case 1: Correct support</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_009_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly supports Basic SUPL INIT protection
 Case 2: Correct discard procedure &#65533; incorrect Protection Level</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_009_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly supports Basic SUPL INIT protection
 Case 3: Correct discard procedure &#65533; incorrect Key Identity</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_009_4" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly supports Basic SUPL INIT protection
 Case 4: Correct discard procedure &#65533; incorrect Basic Replay Counter</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_010_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly accepts compatible Version numbers in SUPL message - 
 Test 1: Support for higher versions of SUPL 2_X_X</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_010_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly accept compatible Version numbers in 
 SUPL messages -
 Test 2: Support for lower versions of SUPL 2_X_X</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_010_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly accept compatible Version numbers in SUPL messages -
 Test 3: Correct support with SLP supporting SUPL V3_0 and V2_0</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_010_4" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly accepts compatible Version numbers in SUPL message -
 Test 4: Correct support with SLP supporting SUPL V1_0 only,  SUPL V1_0 supported by SET</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_011_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly rejects unsupported Version number in SUPL messages -
 Test1: Higher version not supported</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_011_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly rejects unsupported Version number in SUPL messages -
 Test 2: Lower Version not supportet, SUPL V1_0 not supported by SET</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_012" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly rejects incorrect UDP message content</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_020" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-020 - No notification and no verification</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_021" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-021 - Notification only.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_022_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-022 - Notification and verification - Test 1 - (Allowed on no answer). User accepts.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_022_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-022 - Notification and verification - Test 2 - (Allowed on no answer). User rejects.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_022_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-022 - Notification and verification - Test 3 - (Allowed on no answer). No response.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_022_4" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-022 - Notification and verification - Test 4 - (Denied on no answer). User accepts.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_022_5" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-022 - Notification and verification - Test 5 - (Denied on no answer). User rejects.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_022_6" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-022 - Notification and verification - Test 6 - (Denied on no answer). No response.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_023" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-023 - Privacy override</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_024_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-024 - Requestor ID and Client Name - Test 1: usc2 coding</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_024_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-024 - Requestor ID and Client Name - Test 2: GSM default coding</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_024_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-024 - Requestor ID and Client Name - Test 3: UTF-8 coding</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_030_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-030 - Positioning method - Test 1: A-GPS SET assisted</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_030_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-030 - Positioning method - Test 2: A-GPS SET based</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_030_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-030 - Positioning method - Test 3: autonomous GPS</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_030_4" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-030 - Positioning method - Test 4: Enhanced Cell ID</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_030_5" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-030 - Positioning method - Test 5: Cell ID</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_030_7" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions single session Positioning method - 
 Test 7: A-GANSS SET assisted - GLONASS</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_030_9" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions single session Positioning method - 
 Test 9: A-GANSS SET based only - GLONASS</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_030_11" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-030 - Positioning method - Test 11</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_031" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-031 - No Position</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_033_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions Emergency Services Location Requests
 Case 1: E-SLP address sent in SUPL INIT</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_033_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions Emergency Services Location Requests
 Case 2: Use of provisioned H-SLP address</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_033_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions Emergency Services Location Requests
 Case 3: Use of default E-SLP address</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_034_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions an Emergency Services Location Request when a normal SUPL session is also active
 Case 1: Normal SUPL session already in progress before Emergency SUPL session</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_034_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions an Emergency Services Location Request when a normal SUPL session is also active
 Case 2: Normal SUPL session attempted during Emergency SUPL session</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_040_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Real Time Periodic reporting - 
 Test 1: A-GPS SET assisted</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_040_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Real Time Periodic reporting - 
 Test 2: A-GPS SET based</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_050_1_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting with Geographic Target Area -
 Test 1: A-GPS SET assisted, 
 Case 1: Entering event type</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_050_1_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting with Geographic Target Area - 
 Test 1: A-GPS SET assisted, 
 Case 2: Inside event type</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_051_1_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting with Area ID - 
 Test 1: A-GPS SET assisted, 
 Case 1: Entering event type</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_051_1_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting with Area ID - 
 Test 1: A-GPS SET assisted, 
 Case 2: Inside event type</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_061" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions when the Network cancels a Triggered Location Request</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_070_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-070 - Timeout UT2 - Test 1.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_070_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions timer UT2 - 
 Test 2: SUPL POS session (Triggered session).
  
 Note: This test case is applicable to SETs that support any location
 method that requires a SUPL POS session and that supports any
 triggered service. This test case has been written for a Periodic
 Triggered, SET assisted mode Location Session. The case where
 Periodic Location sessions or a SET assisted mode is not supported in
 the SET is FFS</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_070_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-070 - Timeout UT2 - Test 3.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_070_4" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions timer UT2 - 
 Test 4: No SUPL POS session (Triggered session).
 
 Note: This test case is applicable to SETs that support any triggered
 service. This test case has been written for a Periodic Triggered 
 Location Session. The case where Periodic Location sessions is not 
 supported in the SET is FFS.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_071_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-071 - Timeout UT3 - Test 1</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_071_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET coorectly actions timer UT3 - 
 Test 2: Triggered session.
 
 Note: This test case is applicable to SETs that support any location method 
 that requires a SUPL PO session and that supports any triggered service.
 This test case has been written for a Periodic Triggered, SET assisted mode 
 Location Session. The case where Periodic Location sessions or a SET assisted 
 mode is not supported in the SET is FFS.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_073" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions timer UT7</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SLP_INITIATED_Tests" Name="TC_074" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions timer UT8</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_100_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-100 - Correct Session ID - Test 1: IPv4</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_100_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-100 - Correct Session ID - Test 2: IPv6</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_100_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-100 - Correct Session ID - Test 3: FQDN</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_101" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-101 - Invalid SET Session ID</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_102" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-102 - Invalid SLP Session ID</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_103_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly accepts compatible Version numbers in SUPL messages - 
 Test 1: Support for higher versions of SUPL 2_X_X
SUPL-2.0-con-103-1
	TP version:

	Test Case Id :
			
		SUPL-2.0-con-103

	Test Object :
			
		Client

	Test Case Description :
			
		 To test SET correctly accepts compatible Version numbers in SUPL messages

	Specification Reference :
			
		ULP TS 7,9,10

	SCR Reference :
			
		ULP-PRO-C-009-O

	Tool :
			
		SUPL Client Conformance Test Tool

	Test code :
			
		Validated test code for this test case

	Preconditions :
			
		 State: Continuation of / Can be tested at the same time as: Prerequisite
		 for this test: o Applicability:

	Test Procedure :
			
		 Test 1: Support for higher versions of&#160; SUPL 2.X.X 1. Start a SI Location
		 Session 2. In the Common Part of all messages set: Version to: o Maj set
		 to 2 o Min set to a higher value than that supported by the SET o Serv
		 ind set to a higher value than that supported by the SET 3. The SET sends
		 SUPL START 4. Send SUPL RESPONSE with Version set as in step 2. 5. The
		 SET sends SUPL POS INIT with: In the Common Part, Version set to: o Maj
		 set to 2 o Min set to 0 or correct version supported by the SET o Serv
		 ind set to 0 or correct version supported by the SET 6. The Location Session
		 completes successfully.

	Pass-Criteria :
			
		 Test 1 and 2: 1. 1. At step 5 the SET shall respond with SUPL POS INIT
		 with: In the Common Part, Version set to: o Maj set to 2 o Min set to
		 0 or correct version supported by the SET o Serv ind set to 0 or correct
		 version supported by the SET</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_103_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly accepts compatible Version numbers in SUPL messages - 
 Test 2: Support for lower versions of SUPL 2_X_X
SUPL-2.0-con-103-2
	TP version:

	Test Case Id :
			
		SUPL-2.0-con-103

	Test Object :
			
		Client

	Test Case Description :
			
		 To test SET correctly accepts compatible Version numbers in SUPL messages

	Specification Reference :
			
		ULP TS 7,9,10

	SCR Reference :
			
		ULP-PRO-C-009-O

	Tool :
			
		SUPL Client Conformance Test Tool

	Test code :
			
		Validated test code for this test case

	Preconditions :
			
		 State: Continuation of / Can be tested at the same time as: Prerequisite
		 for this test: o Applicability:

	Test Procedure :
			
		 Test 2: Support for lower versions of SUPL 2.X.X. Only applicable if there
		 exists SUPL V2.X where X&gt;0 1. Start a SI Location Session 2. In the Common
		 Part of all messages set: Version to: o Maj set to 2 o Min set to a lower
		 values than the maximum value supported by the SET o Serv ind set to a
		 lower values than the maximum value supported by the SET 3. The SET sends
		 SUPL START 4. Send SUPL RESPONSE with Version set as in step 2. 5. The
		 SET sends SUPL POS INIT with: In the Common Part, Version set to: o Maj
		 set to 2 o Min set to 0 or correct version supported by the SET o Serv
		 ind set to 0 or correct version supported by the SET 6. The Location Session
		 completes successfully.

	Pass-Criteria :
			
		 Test 1 and 2: 1. 1. At step 5 the SET shall respond with SUPL POS INIT
		 with: In the Common Part, Version set to: o Maj set to 2 o Min set to
		 0 or correct version supported by the SET o Serv ind set to 0 or correct
		 version supported by the SET</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_110_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-110 - Positioning method - Test 1: A-GPS SET assisted</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_110_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-110 - Positioning method - Test 2: A-GPS SET based</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_110_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-110 - Positioning method - Test 3: autonomous GPS</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_110_4" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-110 - Positioning method - Test 4: Enhanced Cell ID</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_110_5" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-110 - Positioning method - Test 5: Enhanced Cell ID not supported</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_110_7" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions single session Positioning method - 
 Test 7: A-GANSS SET assisted - GLONASS
SUPL-2.0-con-110-7
	TP version:

	Test Case Id :

		SUPL-2.0-con-110

	Test Object :

		Client

	Test Case Description :

		To test SET correctly actions single session Positioning method

	Specification Reference :

		ULP TS 5.2.1, 8, 9

	SCR Reference :

		ULP-PRO-C-009-O, ULP-PRO-C-011-M, ULP-PRO-C-012-O, ULP-PRO-C-013-O, ULP-PRO-C-014-O, ULP-PRO-C-015-O, ULP-PRO-C-016-O, ULP-PRO-C-018-O


	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AGANSSSETassisted_GLONASS_SET_initiated

	Test Procedure :

		Test 7: A-GANSS SET assisted &#8211;GLONASS [Includes optional features]

		 Note that these test cases only test a single GNSS at one time.
		Testing of support for multiple simultaneous GNSSs is for further study.

		1. All tests: start a SI Location Session
		2. The SET sends SUPL START with:
		  SET capabilities parameter consistent with the Positioning technologies supported

		  by the SET as declared in the ics
		3. Send SUPL RESPONSE with:
		 Positioning Method set to: A-GNSS SET assisted only
		 GNSS Positioning Technology set to: GLONASS
		4. The SET sends SUPL POS INIT with:
		 SET capabilities parameter consistent with the Positioning technologies supported by the SET

		 as declared in the ics
		 5. Do nothing (only Test 4 and Test 5)
		6. A SUPL POS session takes place and completes successfully
		 using the Positioning Method defined by the test case.
		7. Do nothing (only Test 2, Test 3, Test 8, Test 9, Test 10, Test 11 Case 2 and Test 12 Case 2)

		8. send SUPL END with:
		 Position set to a realistic position for the SET.
		9. The SET releases the secure IP connection.
		 Note: Repeat for all&#160; Positioning technologies supported by the SET as declared in the ics


	Pass-Criteria :

		All tests:
		1. At step 2 the SET shall send SUPL START with:
		 SET capabilities parameter consistent with the Positioning technologies supported by the SET as declared

		in the ics
		 2. At step 2 the SET shall send SUPL POS INIT with:
		  SET capabilities parameter consistent with the Positioning technologies supported by the SET

		  as declared in the ics
		All tests except Test 4 and Test 5:
		 3. At step 6 a SUPL POS session shall take place and shall complete successfully

		 using the Positioning Method defined by the test case.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_110_9" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions single session Positioning method - 
 Test 9: A-GANSS SET based - GLONASS
SUPL-2.0-con-110-9
	TP version:

	Test Case Id :

		SUPL-2.0-con-110

	Test Object :

		Client

	Test Case Description :

		To test SET correctly actions single session Positioning method

	Specification Reference :

		ULP TS 5.2.1, 8, 9

	SCR Reference :

		ULP-PRO-C-009-O, ULP-PRO-C-011-M, ULP-PRO-C-012-O, ULP-PRO-C-013-O, ULP-PRO-C-014-O, ULP-PRO-C-015-O, ULP-PRO-C-016-O, ULP-PRO-C-018-O


	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AGANSSSETbased_GLONASS_SET_initiated

	Test Procedure :

		Test 9: A-GANSS SET based &#8211;GLONASS [Includes optional features]
		1. All tests: start a SI Location Session
		2. The SET sends SUPL START with:
		  SET capabilities parameter consistent with the Positioning technologies supported

		  by the SET as declared in the ics
		3. Send SUPL RESPONSE with: Positioning Method set to the value specified in the table below

		 GNSS Positioning Technology set to the value specified in the table below

		4. The SET sends SUPL POS INIT with:
		 SET capabilities parameter consistent with the Positioning technologies supported by the SET

		 as declared in the ics
		6. All tests except Test 4 and Test 5: A SUPL POS session takes place and completes successfully

		 using the Positioning Method defined by the test case.
		7. Test 9: send SUPL END
		9. All tests: the SET releases the secure IP connection.
		 Note: Repeat for all&#160; Positioning technologies supported by the SET as declared in the ics


	Pass-Criteria :

		All tests:
		1. At step 2 the SET shall send SUPL START with:
		 SET capabilities parameter consistent with the Positioning technologies supported by the SET as declared

		in the ics
		 2. At step 2 the SET shall send SUPL POS INIT with:
		  SET capabilities parameter consistent with the Positioning technologies supported by the SET

		  as declared in the ics
		All tests except Test 4 and Test 5:
		 3. At step 6 a SUPL POS session shall take place and shall complete successfully

		 using the Positioning Method defined by the test case.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_130_1_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting using Geographic Target Area - 
 Test 1: A-GPS SET assisted,
 Case 1: Entering event type
SUPL-2.0-con-130-1-1
	TP version:

	Test Case Id :

		SUPL-2.0-con-130

	Test Object :

		Client

	Test Case Description :

		To test SET correctly performs Area Event reporting using Geographic Target Area


	Specification Reference :

		ULP TS 5.2.9

	SCR Reference :

		ULP-PRO-C-033-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AreaEvent_SET_initiated AND ics_GeoTargetArea AND ics_AGPSSETassisted_SET_initiated


	Test Procedure :

		Test 1: A-GPS SET assisted
		Case 1: Entering event type
		Details of GPS scenarios to be used and figures showing locations to aid

		understanding of test cases:
		Case 1: Entering event type
		Simulate a moving GPS scenario starting at latitude 35.666667 degrees
		North, longitude 139.77 degrees East and ending at latitude 35.666667
		degrees North, longitude 139.75 degrees East, moving with a speed of 8

		m/s

		Test 1: A-GPS SET assisted:
		1. Start a SI Area Event Triggered Session with the following values set

		in the application running on the SET or otherwise:
		- Area Event Type:
		o Case 1: Entering event type
		- Repeated reporting
		o Minimum Interval Time: 60 seconds
		o Maximum Number of Reports: 6
		- Start Time: If supported: 30 seconds
		- Stop Time: If supported: 240 seconds
		- Geographic Target Area List with:
		o Geographic Target Area set to:
		- Circular with:
		Case #1, Case #2:
		- Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.75
		degrees East
		- Radius set to: 1000 meters
		- Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred on the
		coordinates of the GPS &#8220;Tokyo&#8221; scenario
		specified in [3GPP TS 34.108]

		2. The SET sends SUPL TRIGGERED START with:
		- Trigger Type set to Area Event
		- The details of the Reporting Capability parameter consistent
		with the known reporting capabilities supported by the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters are consistent with the
		known reporting capabilities supported by the SET.

		3. Send SUPL TRIGGERED RESPONSE with:
		- Positioning Method set to A-GPS SET assisted.
		- Trigger Params not set
		Note that the SET may release the secure connection at this point.

		4. At any time:
		- The SET responds with SUPL POS INIT and a SUPL POS
		session takes place
		- The SUPL POS Session completes successfully
		- Send SUPL REPORT with the correctly calculated position
		Note that the SET may release the secure connection at this point.
		5. After at least 30 seconds (set by Start Time) after step 2, or
		immediately after step 4 if Start Time is not supported:
		Case 1: The SET does not immediately display the position estimate as
		Entering event has not been met. Note however that the SET will
		eventually respond as described in step 7.

		6. Until step 8 is reached, the following sequence takes place
		repeatedly:
		- The SET responds with SUPL POS INIT and a SUPL POS
		session takes place
		- The SUPL POS Session completes successfully
		- Send SUPL REPORT with the correctly calculated position.
		Note that the SET may release the secure connection at this point.

		7. Case 1: After one of these sequences the SET displays the position
		estimate as Entering event has been met. At other times the SET does
		not display the position estimate as Entering event has not been met.

		8. If Stop Time is supported, the SET sends SUPL END approximately
		240 seconds (set by Stop Time) after step 2.
		If Stop Time is not supported:
		Case 1 and Case 4: 240 seconds after step 2 send SUPL TRIGGERED
		STOP (to terminate the test)


	Pass-Criteria :

		1. At step 2:
		- The Trigger Type shall be set to Area Event
		- The details of the Reporting Capability parameter shall be
		consistent with the known Reporting capabilities supported by
		the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters shall be consistent with the
		known reporting capabilities supported by the SET.
		2. At step 4 and step 6 the SUPL POS Sessions shall complete
		successfully
		3. At step 5: Case 1and Case 4: The SET shall not display the position

		estimate
		4: At step 7: Case 1and Case 4: After one of these sequences the SET
		shall display the position estimate. After the others of these sequences

		the SET shall not display the position estimate.

		5. At step 8:
		If Stop Time is supported the SET shall send SUPL END approximately
		240 seconds after step 2.If Stop Time is not supported:
		Case 1 and Case 4: No requirement</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_130_1_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting using Geographic Target Area - 
 Test 1: A-GPS SET assisted,
 Case 2: Inside event type
SUPL-2.0-con-130-1-2
	TP version:

	Test Case Id :

		SUPL-2.0-con-130

	Test Object :

		Client

	Test Case Description :

		To test SET correctly performs Area Event reporting using Geographic Target Area


	Specification Reference :

		ULP TS 5.2.9

	SCR Reference :

		ULP-PRO-C-033-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AreaEvent_SET_initiated AND ics_GeoTargetArea AND ics_AGPSSETassisted_SET_initiated


	Test Procedure :

		Test 1: A-GPS SET assisted
		Case 2: Inside event type
		Details of GPS scenarios to be used and figures showing locations to aid

		understanding of test cases:
		Case 2: Inside event type
		Use the static GPS &#8220;Tokyo&#8221; scenario specified in [3GPP TS 34.108]

		1. Start a SI Area Event Triggered Session with the following values set

		in the application running on the SET or otherwise:
		- Area Event Type:
		o Case 2: Inside event type
		- Repeated reporting
		o Minimum Interval Time: 60 seconds
		o Maximum Number of Reports: 6
		- Start Time: If supported: 30 seconds
		- Stop Time: If supported: 240 seconds
		- Geographic Target Area List with:
		o Geographic Target Area set to:
		- Circular with:
		Case #1, Case #2:
		- Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.75
		degrees East
		- Radius set to: 1000 meters
		- Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred on the
		coordinates of the GPS &#8220;Tokyo&#8221; scenario
		specified in [3GPP TS 34.108]

		2. The SET sends SUPL TRIGGERED START with:
		- Trigger Type set to Area Event
		- The details of the Reporting Capability parameter consistent
		with the known reporting capabilities supported by the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters are consistent with the
		known reporting capabilities supported by the SET.

		3. Send SUPL TRIGGERED RESPONSE with:
		- Positioning Method set to A-GPS SET assisted.
		- Trigger Params not set
		Note that the SET may release the secure connection at this point.

		4. At any time:
		- The SET responds with SUPL POS INIT and a SUPL POS
		session takes place
		- The SUPL POS Session completes successfully
		- Send SUPL REPORT with the correctly calculated position
		Note that the SET may release the secure connection at this point.

		5. After at least 30 seconds (set by Start Time) after step 2, or
		immediately after step 4 if Start Time is not supported:
		Case 2: The SET displays the calculated position estimate as Inside
		event has been met

		6. Until step 8 is reached, the following sequence takes place
		repeatedly:
		- The SET responds with SUPL POS INIT and a SUPL POS
		session takes place
		- The SUPL POS Session completes successfully
		- Send SUPL REPORT with the correctly calculated position.
		Note that the SET may release the secure connection at this point.

		7.Case 2: At intervals of at least 60 seconds (set by Minimum Interval

		Time) after the display of the previous position estimate, the SET
		displays the position estimate as Inside event has been met

		8. If Stop Time is supported, the SET sends SUPL END approximately
		240 seconds (set by Stop Time) after step 2.
		If Stop Time is not supported:

		Case 2 and Case 3: At intervals of at least 60 seconds (set by Minimum

		Interval Time) after the display of the previous position estimate, the

		SET displays the remaining number of position estimates (the total
		number set by Maximum Number of Reports), and then the SET sends
		SUPL END


	Pass-Criteria :

		1. At step 2:
		- The Trigger Type shall be set to Area Event
		- The details of the Reporting Capability parameter shall be
		consistent with the known Reporting capabilities supported by
		the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters shall be consistent with the
		known reporting capabilities supported by the SET.
		2. At step 4 and step 6 the SUPL POS Sessions shall complete
		successfully
		3. At step 5:
		Case 2 and Case 3: The SET shall display the calculated position
		estimate after at least 30 seconds after step 2 or immediately after step 3

		if Start Time is not supported
		4: At step 7:
		Case 2 and Case 3: After each of these sequences the SET shall display

		the position estimate at intervals of at least 60 seconds after the display

		of the previous position estimate.
		5. At step 8:
		If Stop Time is supported the SET shall send SUPL END approximately
		240 seconds after step 2.If Stop Time is not supported:
		Case 2 and Case 3: At intervals of at least 60 seconds after the display

		of the previous position estimate, the SET shall display the remaining

		number of position estimates and then the SET shall send SUPL END</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_130_1_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting using Geographic Target Area - 
 Test 1: A-GPS SET assisted,
 Case 3: Outside event type
SUPL-2.0-con-130-1-3
	TP version:

	Test Case Id :

		SUPL-2.0-con-130

	Test Object :

		Client

	Test Case Description :

		To test SET correctly performs Area Event reporting using Geographic Target Area


	Specification Reference :

		ULP TS 5.2.9

	SCR Reference :

		ULP-PRO-C-033-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AreaEvent_SET_initiated AND ics_GeoTargetArea AND ics_AGPSSETassisted_SET_initiated


	Test Procedure :

		Test 1: A-GPS SET assisted
		Case 3: Outside event type

		Details of GPS scenarios to be used and figures showing locations to aid

		understanding of test cases:
		Case 3: Outside event type
		Use the static GPS &#8220;Tokyo&#8221; scenario specified in [3GPP TS 34.108]

		1. Start a SI Area Event Triggered Session with the following values set

		in the application running on the SET or otherwise:
		- Area Event Type:
		o Case 3: Outside event type
		- Repeated reporting
		o Minimum Interval Time: 60 seconds
		o Maximum Number of Reports: 6
		- Start Time: If supported: 30 seconds
		- Stop Time: If supported: 240 seconds
		- Geographic Target Area List with:
		o Geographic Target Area set to:
		- Circular with:
		Case #3, Case #4:
		- Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.77
		degrees East
		- Radius set to: 1000 meters
		- Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred
		approximately 2km from the coordinates of
		the GPS &#8220;Tokyo&#8221; scenario specified in
		[3GPP TS 34.108]
		- Area Id Lists not set

		2. The SET sends SUPL TRIGGERED START with:
		- Trigger Type set to Area Event
		- The details of the Reporting Capability parameter consistent
		with the known reporting capabilities supported by the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters are consistent with the
		known reporting capabilities supported by the SET.

		3. Send SUPL TRIGGERED RESPONSE with:
		- Positioning Method set to A-GPS SET assisted.
		- Trigger Params not set
		Note that the SET may release the secure connection at this point.

		4. At any time:
		- The SET responds with SUPL POS INIT and a SUPL POS
		session takes place
		- The SUPL POS Session completes successfully
		- Send SUPL REPORT with the correctly calculated position
		Note that the SET may release the secure connection at this point.
		5. After at least 30 seconds (set by Start Time) after step 2, or
		immediately after step 4 if Start Time is not supported:
		Case 3: The SET displays the calculated position estimate as Outside
		event has been met

		6. Until step 8 is reached, the following sequence takes place
		repeatedly:
		- The SET responds with SUPL POS INIT and a SUPL POS
		session takes place
		- The SUPL POS Session completes successfully
		- Send SUPL REPORT with the correctly calculated position.
		Note that the SET may release the secure connection at this point.

		7. Case 3: At intervals of at least 60 seconds (set by Minimum Interval

		Time) after the display of the previous position estimate, the SET
		displays the position estimate as Outside event has been met

		8. If Stop Time is supported, the SET sends SUPL END approximately
		240 seconds (set by Stop Time) after step 2.
		If Stop Time is not supported:
		Case 2 and Case 3: At intervals of at least 60 seconds (set by Minimum

		Interval Time) after the display of the previous position estimate, the

		SET displays the remaining number of position estimates (the total
		number set by Maximum Number of Reports), and then the SET sends
		SUPL END


	Pass-Criteria :

		1. At step 2:
		- The Trigger Type shall be set to Area Event
		- The details of the Reporting Capability parameter shall be
		consistent with the known Reporting capabilities supported by
		the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters shall be consistent with the
		known reporting capabilities supported by the SET.
		2. At step 4 and step 6 the SUPL POS Sessions shall complete
		successfully
		3. At step 5: Case 1and Case 4: The SET shall not display the position

		estimate
		Case 2 and Case 3: The SET shall display the calculated position
		estimate after at least 30 seconds after step 2 or immediately after step 3

		if Start Time is not supported
		4: At step 7: Case 1and Case 4: After one of these sequences the SET
		shall display the position estimate. After the others of these sequences

		the SET shall not display the position estimate.
		Case 2 and Case 3: After each of these sequences the SET shall display

		the position estimate at intervals of at least 60 seconds after the display

		of the previous position estimate.
		5. At step 8:
		If Stop Time is supported the SET shall send SUPL END approximately
		240 seconds after step 2.If Stop Time is not supported:
		Case 1 and Case 4: No requirement
		Case 2 and Case 3: At intervals of at least 60 seconds after the display

		of the previous position estimate, the SET shall display the remaining

		number of position estimates and then the SET shall send SUPL END</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_130_1_4" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting using Geographic Target Area - 
 Test 1: A-GPS SET assisted,
 Case 4: Leaving event type
SUPL-2.0-con-130-1-4
	TP version:

	Test Case Id :

		SUPL-2.0-con-130

	Test Object :

		Client

	Test Case Description :

		To test SET correctly performs Area Event reporting using Geographic Target Area


	Specification Reference :

		ULP TS 5.2.9

	SCR Reference :

		ULP-PRO-C-033-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AreaEvent_SET_initiated AND ics_GeoTargetArea AND ics_AGPSSETassisted_SET_initiated


	Test Procedure :

		Test 1: A-GPS SET assisted
		Case 4: Leaving event type
		Details of GPS scenarios to be used and figures showing locations to aid

		understanding of test cases:
		Case 4: Leaving event type Simulate a moving GPS scenario starting at
		latitude 35.666667 degrees North, longitude 139.77 degrees East and ending

		at latitude 35.666667 degrees North, longitude 139.75 degrees East, moving

		with a speed of 8 m/s

		1. Start a SI Area Event Triggered Session with the following values set

		in the application running on the SET or otherwise:
		- Area Event Type:
		o Case 4: Leaving event type
		- Repeated reporting
		o Minimum Interval Time: 60 seconds
		o Maximum Number of Reports: 6
		- Start Time: If supported: 30 seconds
		- Stop Time: If supported: 240 seconds
		- Geographic Target Area List with:
		o Geographic Target Area set to:
		- Circular with:
		Case #3, Case #4:
		- Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.77
		degrees East
		- Radius set to: 1000 meters
		- Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred
		approximately 2km from the coordinates of
		the GPS &#8220;Tokyo&#8221; scenario specified in
		[3GPP TS 34.108]
		- Area Id Lists not set

		2. The SET sends SUPL TRIGGERED START with:
		- Trigger Type set to Area Event
		- The details of the Reporting Capability parameter consistent
		with the known reporting capabilities supported by the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters are consistent with the
		known reporting capabilities supported by the SET.

		3. Send SUPL TRIGGERED RESPONSE with:
		- Positioning Method set to A-GPS SET assisted.
		- Trigger Params not set
		Note that the SET may release the secure connection at this point.

		4. At any time:
		- The SET responds with SUPL POS INIT and a SUPL POS
		session takes place
		- The SUPL POS Session completes successfully
		- Send SUPL REPORT with the correctly calculated position
		Note that the SET may release the secure connection at this point.

		5. After at least 30 seconds (set by Start Time) after step 2, or
		immediately after step 4 if Start Time is not supported:
		Case 4: The SET does not immediately display the position estimate as
		Leaving event has not been met. Note however that the SET will
		eventually respond as described in step 7.

		6. Until step 8 is reached, the following sequence takes place
		repeatedly:
		- The SET responds with SUPL POS INIT and a SUPL POS
		session takes place
		- The SUPL POS Session completes successfully
		- Send SUPL REPORT with the correctly calculated position.
		Note that the SET may release the secure connection at this point.

		7. Case 4: After one of these sequences the SET displays the position
		estimate as Leaving event has been met. At other times the SET does
		not display the position estimate as Leaving event has not been met.

		8. If Stop Time is supported, the SET sends SUPL END approximately
		240 seconds (set by Stop Time) after step 2.
		If Stop Time is not supported:
		Case 1 and Case 4: 240 seconds after step 2 send SUPL TRIGGERED
		STOP (to terminate the test)


	Pass-Criteria :

		1. At step 2:
		- The Trigger Type shall be set to Area Event
		- The details of the Reporting Capability parameter shall be
		consistent with the known Reporting capabilities supported by
		the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters shall be consistent with the
		known reporting capabilities supported by the SET.

		2. At step 4 and step 6 the SUPL POS Sessions shall complete
		successfully

		3. At step 5: Case 1and Case 4: The SET shall not display the position

		estimate

		4: At step 7: Case 1and Case 4: After one of these sequences the SET
		shall display the position estimate. After the others of these sequences

		the SET shall not display the position estimate.

		5. At step 8:
		If Stop Time is supported the SET shall send SUPL END approximately
		240 seconds after step 2.If Stop Time is not supported:
		Case 1 and Case 4: No requirement</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_130_2_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting using Geographic Target Area - 
 Test 2: A-GPS SET based,
 Case 1: Entering event type
SUPL-2.0-con-130-2-1
	TP version:

	Test Case Id :

		SUPL-2.0-con-130

	Test Object :

		Client

	Test Case Description :

		To test SET correctly performs Area Event reporting using Geographic Target Area


	Specification Reference :

		ULP TS 5.2.9

	SCR Reference :

		ULP-PRO-C-033-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AreaEvent_SET_initiated AND ics_GeoTargetArea AND ics_AGPSSETbased_SET_initiated


	Test Procedure :

		Test 2: A-GPS SET based
		Case 1: Entering event type
		Details of GPS scenarios to be used and figures showing locations to aid

		understanding of test cases:
		Case 1: Entering event type
		Simulate a moving GPS scenario starting at latitude 35.666667 degrees
		North, longitude 139.77 degrees East and ending at latitude 35.666667
		degrees North, longitude 139.75 degrees East, moving with a speed of 8

		m/s

		1. Start a SI Area Event Triggered Session with the following values set

		in the application running on the SET or otherwise:
		- Area Event Type:
		o Case 1: Entering event type
		- Repeated reporting
		o Minimum Interval Time: 60 seconds
		o Maximum Number of Reports: 6
		- Start Time: If supported: 30 seconds
		- Stop Time: If supported: 240 seconds
		- Geographic Target Area List with:
		o Geographic Target Area set to:
		- Circular with:
		Case #1, Case #2:
		- Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.75
		degrees East
		- Radius set to: 1000 meters
		- Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred on the
		coordinates of the GPS &#8220;Tokyo&#8221; scenario
		specified in [3GPP TS 34.108]
		Case #3, Case #4:
		- Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.77
		degrees East
		- Radius set to: 1000 meters
		- Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred
		approximately 2km from the coordinates of
		the GPS &#8220;Tokyo&#8221; scenario specified in
		[3GPP TS 34.108]
		- Area Id Lists not set

		2. The SET sends SUPL TRIGGERED START with:
		- Trigger Type set to Area Event
		- The details of the Reporting Capability parameter consistent
		with the known reporting capabilities supported by the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters are consistent with the
		known reporting capabilities supported by the SET.

		3. Send SUPL TRIGGERED RESPONSE with:
		- Positioning Method set to A-GPS SET based.
		- Trigger Params not set
		Note that the SET may release the secure connection at this point.

		10. At any time during the following part of the test when the SET is
		required to make a position estimate, if the SET requires Assistance
		Data, then:
		- The SET responds with SUPL POS INIT
		- A SUPL POS session takes place and completes successfully
		- Send SUPL REPORT with no parameters.
		Note that the SET may release the secure connection at this point.

		11. After at least 30 seconds (set by Start Time) after step 2, or
		immediately after step 3 if Start Time is not supported:
		Case 1: The SET does not immediately display the position estimate as
		Entering event has not been met. Note however that the SET will
		eventually respond as described in step 12.

		12. Until step 13 is reached:
		Case 1: At one time the SET displays the position estimate as Entering

		event has been met. The remainder of the time the SET does not display

		the position estimate as Entering event has not been met.

		13. If Stop Time is supported, the SET sends SUPL END approximately
		240 seconds (set by Stop Time) after step 2.
		If Stop Time is not supported:
		Case 1 and Case 4: 240 seconds after step 2 send SUPL TRIGGERED
		STOP (to terminate the test)



	Pass-Criteria :

		1. At step 2:
		- The Trigger Type shall be set to Area Event
		- The details of the Reporting Capability parameter shall be
		consistent with the known Reporting capabilities supported by
		the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters shall be consistent with the
		known reporting capabilities supported by the SET.

		Test 2:
		6. At step 11: Case 1and Case 4: The SET shall not display the position

		estimate

		7: At step 12: Case 1and Case 4: At one time the SET shall display the

		position estimate. The remainder of the time the SET shall not display

		the position estimate.


		8. At step 13:
		If Stop Time is supported the SET shall send SUPL END approximately
		240 seconds after step 2.
		If Stop Time is not supported:
		Case 1 and Case 4: No requirement</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_130_2_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting using Geographic Target Area - 
 Test 2: A-GPS SET based,
 Case 2: Inside event type
SUPL-2.0-con-130-2-2
	TP version:

	Test Case Id :

		SUPL-2.0-con-130

	Test Object :

		Client

	Test Case Description :

		To test SET correctly performs Area Event reporting using Geographic Target Area


	Specification Reference :

		ULP TS 5.2.9

	SCR Reference :

		ULP-PRO-C-033-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AreaEvent_SET_initiated AND ics_GeoTargetArea AND ics_AGPSSETbased_SET_initiated


	Test Procedure :

		Test 2: A-GPS SET based
		Case 2: Inside event type
		Use the static GPS &#8220;Tokyo&#8221; scenario specified in [3GPP TS 34.108]

		1. Start a SI Area Event Triggered Session with the following values set

		in the application running on the SET or otherwise:
		- Area Event Type:
		o Case 2: Inside event type
		- Repeated reporting
		o Minimum Interval Time: 60 seconds
		o Maximum Number of Reports: 6
		- Start Time: If supported: 30 seconds
		- Stop Time: If supported: 240 seconds
		- Geographic Target Area List with:
		o Geographic Target Area set to:
		- Circular with:
		Case #1, Case #2:
		- Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.75
		degrees East
		- Radius set to: 1000 meters
		- Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred on the
		coordinates of the GPS &#8220;Tokyo&#8221; scenario
		specified in [3GPP TS 34.108]

		2. The SET sends SUPL TRIGGERED START with:
		- Trigger Type set to Area Event
		- The details of the Reporting Capability parameter consistent
		with the known reporting capabilities supported by the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters are consistent with the
		known reporting capabilities supported by the SET.

		3. Send SUPL TRIGGERED RESPONSE with:
		- Positioning Method set to A-GPS SET based.
		- Trigger Params not set

		10. At any time during the following part of the test when the SET is
		required to make a position estimate, if the SET requires Assistance
		Data, then:
		- The SET responds with SUPL POS INIT
		- A SUPL POS session takes place and completes successfully
		- Send SUPL REPORT with no parameters.
		Note that the SET may release the secure connection at this point.

		11. After at least 30 seconds (set by Start Time) after step 2, or
		immediately after step 3 if Start Time is not supported:
		Case 2: The SET displays the calculated position estimate as Inside
		event has been met

		12. Until step 13 is reached:
		Case 2: At intervals of at least 60 seconds (set by Minimum Interval
		Time) after the display of the previous position estimate, the SET
		displays the position estimate as Inside event has been met

		13. If Stop Time is supported, the SET sends SUPL END approximately
		240 seconds (set by Stop Time) after step 2.
		If Stop Time is not supported:
		Case 2 and Case 3: At intervals of at least 60 seconds (set by Minimum

		Interval Time) after the display of the previous position estimate, the

		SET displays the remaining number of position estimates (the total
		number set by Maximum Number of Reports), and then the SET sends
		SUPL END


	Pass-Criteria :

		1. At step 2:
		- The Trigger Type shall be set to Area Event
		- The details of the Reporting Capability parameter shall be
		consistent with the known Reporting capabilities supported by
		the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters shall be consistent with the
		known reporting capabilities supported by the SET.

		Test 2:
		6. At step 11:
		Case 2 and Case 3: The SET shall display the calculated position
		estimate after at least 30 seconds after step 2 or immediately after step 3

		if Start Time is not supported
		7: At step 12:
		Case 2 and Case 3: At intervals of at least 60 seconds (set by Minimum

		Interval Time) after the display of the previous position estimate, the

		SET shall display the position estimate.
		8. At step 13:
		If Stop Time is supported the SET shall send SUPL END approximately
		240 seconds after step 2.
		If Stop Time is not supported:
		Case 2 and Case 3: At intervals of at least 60 seconds after the display

		of the previous position estimate, the SET shall display the remaining

		number of position estimates and then the SET shall send SUPL END</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_130_2_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting using Geographic Target Area - 
 Test 2: A-GPS SET based,
 Case 3: Outside event type
SUPL-2.0-con-130-2-3
	TP version:

	Test Case Id :

		SUPL-2.0-con-130

	Test Object :

		Client

	Test Case Description :

		To test SET correctly performs Area Event reporting using Geographic Target Area


	Specification Reference :

		ULP TS 5.2.9

	SCR Reference :

		ULP-PRO-C-033-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AreaEvent_SET_initiated AND ics_GeoTargetArea AND ics_AGPSSETbased_SET_initiated


	Test Procedure :

		Test 2: A-GPS SET based
		Case 3: Outside event type
		Use the static GPS &#8220;Tokyo&#8221; scenario specified in [3GPP TS 34.108]
		Figure 3: Case 3: SET is outside area

		1. Start a SI Area Event Triggered Session with the following values set

		in the application running on the SET or otherwise:
		- Area Event Type:
		o Case 3: Outside event type
		- Repeated reporting
		o Minimum Interval Time: 60 seconds
		o Maximum Number of Reports: 6
		- Start Time: If supported: 30 seconds
		- Stop Time: If supported: 240 seconds
		- Geographic Target Area List with:
		o Geographic Target Area set to:
		- Circular with:
		Case #3, Case #4:
		- Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.77
		degrees East
		- Radius set to: 1000 meters
		- Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred
		approximately 2km from the coordinates of
		the GPS &#8220;Tokyo&#8221; scenario specified in
		[3GPP TS 34.108]
		- Area Id Lists not set

		2. The SET sends SUPL TRIGGERED START with:
		- Trigger Type set to Area Event
		- The details of the Reporting Capability parameter consistent
		with the known reporting capabilities supported by the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters are consistent with the
		known reporting capabilities supported by the SET.

		3. Send SUPL TRIGGERED RESPONSE with:
		- Positioning Method set to A-GPS SET based.
		- Trigger Params not set
		Note that the SET may release the secure connection at this point.

		10. At any time during the following part of the test when the SET is
		required to make a position estimate, if the SET requires Assistance
		Data, then:
		- The SET responds with SUPL POS INIT
		- A SUPL POS session takes place and completes successfully
		- Send SUPL REPORT with no parameters.
		Note that the SET may release the secure connection at this point.

		11. After at least 30 seconds (set by Start Time) after step 2, or
		immediately after step 3 if Start Time is not supported:
		Case 3: The SET displays the calculated position estimate as Outside
		event has been met

		12. Until step 13 is reached:
		Case 3: At intervals of at least 60 seconds (set by Minimum Interval
		Time) after the display of the previous position estimate, the SET
		displays the position estimate as Outside event has been met

		13. If Stop Time is supported, the SET sends SUPL END approximately
		240 seconds (set by Stop Time) after step 2.
		If Stop Time is not supported:
		Case 2 and Case 3: At intervals of at least 60 seconds (set by Minimum

		Interval Time) after the display of the previous position estimate, the

		SET displays the remaining number of position estimates (the total
		number set by Maximum Number of Reports), and then the SET sends
		SUPL END


	Pass-Criteria :

		1. At step 2:
		- The Trigger Type shall be set to Area Event
		- The details of the Reporting Capability parameter shall be
		consistent with the known Reporting capabilities supported by
		the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters shall be consistent with the
		known reporting capabilities supported by the SET.

		Test 2:
		6. At step 11:
		Case 2 and Case 3: The SET shall display the calculated position
		estimate after at least 30 seconds after step 2 or immediately after step 3

		if Start Time is not supported

		7: At step 12:
		Case 2 and Case 3: At intervals of at least 60 seconds (set by Minimum

		Interval Time) after the display of the previous position estimate, the

		SET shall display the position estimate.

		8. At step 13:
		If Stop Time is supported the SET shall send SUPL END approximately
		240 seconds after step 2.
		If Stop Time is not supported:
		Case 2 and Case 3: At intervals of at least 60 seconds after the display

		of the previous position estimate, the SET shall display the remaining

		number of position estimates and then the SET shall send SUPL END</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_130_2_4" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting using Geographic Target Area - 
 Test 2: A-GPS SET based,
 Case 1: Leaving event type
SUPL-2.0-con-130-2-4
	TP version:

	Test Case Id :

		SUPL-2.0-con-130

	Test Object :

		Client

	Test Case Description :

		To test SET correctly performs Area Event reporting using Geographic Target Area


	Specification Reference :

		ULP TS 5.2.9

	SCR Reference :

		ULP-PRO-C-033-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AreaEvent_SET_initiated AND ics_GeoTargetArea AND ics_AGPSSETbased_SET_initiated


	Test Procedure :

		Test 2: A-GPS SET based
		Case 4: Leaving event type
		Details of GPS scenarios to be used and figures showing locations to aid

		understanding of test cases:
		Case 4: Leaving event type Simulate a moving GPS scenario starting at
		latitude 35.666667 degrees North, longitude 139.77 degrees East and ending

		at latitude 35.666667 degrees North, longitude 139.75 degrees East, moving

		with a speed of 8 m/s

		1. Start a SI Area Event Triggered Session with the following values set

		in the application running on the SET or otherwise:
		- Area Event Type:
		o Case 4: Leaving event type
		- Repeated reporting
		o Minimum Interval Time: 60 seconds
		o Maximum Number of Reports: 6
		- Start Time: If supported: 30 seconds
		- Stop Time: If supported: 240 seconds
		- Geographic Target Area List with:
		o Geographic Target Area set to:
		- Circular with:
		Case #3, Case #4:
		- Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.77
		degrees East
		- Radius set to: 1000 meters
		- Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred
		approximately 2km from the coordinates of
		the GPS &#8220;Tokyo&#8221; scenario specified in
		[3GPP TS 34.108]
		- Area Id Lists not set

		2. The SET sends SUPL TRIGGERED START with:
		- Trigger Type set to Area Event
		- The details of the Reporting Capability parameter consistent
		with the known reporting capabilities supported by the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters are consistent with the
		known reporting capabilities supported by the SET.

		3. Send SUPL TRIGGERED RESPONSE with:
		- Positioning Method set to A-GPS SET based.
		- Trigger Params not set

		10. At any time during the following part of the test when the SET is
		required to make a position estimate, if the SET requires Assistance
		Data, then:
		- The SET responds with SUPL POS INIT
		- A SUPL POS session takes place and completes successfully
		- Send SUPL REPORT with no parameters.
		Note that the SET may release the secure connection at this point.

		11. After at least 30 seconds (set by Start Time) after step 2, or
		immediately after step 3 if Start Time is not supported:
		Case 4: The SET does not immediately display the position estimate as
		Leaving event has not been met. Note however that the SET will
		eventually respond as described in step 12.

		12. Until step 13 is reached:
		Case 4: At one time the SET displays the position estimate as Leaving
		event has been met. The remainder of the time the SET does not display

		the position estimate as Leaving event has not been met.

		13. If Stop Time is supported, the SET sends SUPL END approximately
		240 seconds (set by Stop Time) after step 2.
		If Stop Time is not supported:
		Case 1 and Case 4: 240 seconds after step 2 send SUPL TRIGGERED
		STOP (to terminate the test)


	Pass-Criteria :

		1. At step 2:
		- The Trigger Type shall be set to Area Event
		- The details of the Reporting Capability parameter shall be
		consistent with the known Reporting capabilities supported by
		the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters shall be consistent with the
		known reporting capabilities supported by the SET.

		Test 2:
		6. At step 11: Case 1and Case 4: The SET shall not display the position

		estimate
		Case 2 and Case 3: The SET shall display the calculated position
		estimate after at least 30 seconds after step 2 or immediately after step 3

		if Start Time is not supported
		7: At step 12: Case 1and Case 4: At one time the SET shall display the

		position estimate. The remainder of the time the SET shall not display

		the position estimate.
		Case 2 and Case 3: At intervals of at least 60 seconds (set by Minimum

		Interval Time) after the display of the previous position estimate, the

		SET shall display the position estimate.
		8. At step 13:
		If Stop Time is supported the SET shall send SUPL END approximately
		240 seconds after step 2.
		If Stop Time is not supported:
		Case 1 and Case 4: No requirement
		Case 2 and Case 3: At intervals of at least 60 seconds after the display

		of the previous position estimate, the SET shall display the remaining

		number of position estimates and then the SET shall send SUPL END</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_131_1_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting using Area ID generated by the SLP - 
 Test 1: A-GPS SET assisted,
 Case 1: Entering event type
SUPL-2.0-con-131-1-1
	TP version:

	Test Case Id :

		SUPL-2.0-con-131

	Test Object :

		Client

	Test Case Description :

		To test SET correctly performs Area Event reporting using Area ID generated by the SLP: MS Assisted


	Specification Reference :

		ULP TS 5.2.9

	SCR Reference :

		ULP-PRO-C-033-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AreaEvent_SET_initiated AND ics_GeoTargetArea AND ics_AreaId AND ics_AGPSSETassisted_SET_initiated


	 Test Procedure :

		Test 1: A-GPS SET assisted
		Case 1: Entering event type
		Details of cellular scenarios to be used and figures showing locations to aid

		understanding of test cases:
		In all cases the SET specifies the &#8220;Tokyo&#8221; Geographical target area and the

		SLP converts this into the Cell ID that is normally
		Case 1: Entering event type
		The SET camps on a GSM or WCDMA Cell ID that is not normally used for
		testing and that is not present in Area ID list. The SET then handsover to the

		cell that is normally used for testing and that is present in the Area ID List.


		1. Start a SI Area Event Triggered Session with the following values set

		in the application running on the SET or otherwise:
		- Area Event Type:
		o Case 1: Entering event type
		- Repeated reporting
		o Minimum Interval Time: 60 seconds
		o Maximum Number of Reports: 4
		 Start Time: If supported: 30 seconds
		 Stop Time: If supported:
		o Case 1 and Case 4: 240 seconds
		 Geographic Target Area List with:
		o Geographic Target Area set to:
		 Circular with:
		 Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.75
		degrees East
		 Radius set to: 1000 meters
		 Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred on the
		coordinates of the GPS &#8220;Tokyo&#8221; scenario
		specified in [3GPP TS 34.108]
		 Area Id Lists not set

		2. The SET sends SUPL TRIGGERED START with:
		 Trigger Type set to Area Event
		 The details of the Reporting Capability parameter consistent
		with the known reporting capabilities supported by the SET.
		 If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters are consistent with the
		known reporting capabilities supported by the SET.

		3. Send SUPL TRIGGERED RESPONSE with:
		 Positioning Method set to A-GPS SET assisted.
		 Trigger Params set to Area Event Params with:
		o Area Event Type:
		 Case 1: Entering event type
		o Location estimate: True
		o Repeated reporting not set
		o Geographic Target Area List not set
		o Area Id List with:
		 Area Id Set set to one of the following,
		depending on the technology being used for
		testing:
		 GSM Area Id with: Cell Global
		Identity set to value normally used
		during testing with GSM and
		Mobile Country Code, Mobile
		Network Code and Location Area
		Code not set
		 WCDMA Area Id with: Cell
		Identity set to value normally used
		during testing with WCDMA and
		Mobile Country Code, Mobile
		Network Code and Location Area
		Code not set
		 Area Id Set Type and Geographic Area
		Mapping List not set
		Note that the SET may release the secure connection at this point.

		4. At some time:
		 - Case 1: The SET does not respond as Entering event has not
		been met.

		5. Do nothing (Step only applies to cases 2 and 3)

		6. At some time:
		Case 1 and Case 4:
		 - Case 1: The SET does not respond as Entering event has not
		been met.

		7. Do nothing (Step only applies to cases 2 and 3)

		8. Do nothing (Step only applies to cases 2 and 3)

		9. Case 1 and Case 4:
		120 seconds after step 2:
		Case 1: force a cellular handover to the GSM or WCDMA Cell ID that
		is normally used for testing.

		10. Case 1 and Case 4:
		At some time:
		- The SET responds with SUPL POS INIT and a SUPL POS
		session takes place
		- The SUPL POS Session completes successfully
		- Send SUPL REPORT with the correctly calculated position.
		Note that the SET may release the secure connection at this point.

		11. Case 1 and Case 4:
		Case 1: The SET displays the calculated position estimate as Entering
		event has been met.

		12. Case 1 and Case 4:
		If Stop Time is supported, the SET sends SUPL END approximately
		240 seconds (set by Stop Time) after step 2.
		If Stop Time is not supported, 240 seconds after step 2 send SUPL
		TRIGGERED STOP (to terminate the test)

	Pass-Criteria :

		1. At step 2:
		- The Trigger Type shall be set to Area Event
		- The details of the Reporting Capability parameter shall be
		consistent with the known Reporting capabilities supported by
		the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters shall be consistent with the
		known reporting capabilities supported by the SET.

		2. At step 4:
		Case 1 and Case 4 the SET shall not respond

		4. At step 6:
		Case 1 and Case 4 the SET shall not respond

		7. At step 10: Case 1 and Case 4 the SET shall respond with SUPL POS
		INIT and a SUPL POS session shall take place and complete
		successfully

		8. At step 11: Case 1 and Case 4 the SET shall display the calculated
		position estimate

		9. At step 12: Case 1 and Case 4 if Stop Time is supported, the SET
		shall send SUPL END approximately 240 seconds after step 2.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_131_1_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting using Area ID generated by the SLP - 
 Test 1: A-GPS SET assisted,
 Case 2: Inside event type
SUPL-2.0-con-131-1-2
	TP version:

	Test Case Id :

		SUPL-2.0-con-131

	Test Object :

		Client

	Test Case Description :

		To test SET correctly performs Area Event reporting using Area ID generated by the SLP: MS Assisted


	Specification Reference :

		ULP TS 5.2.9

	SCR Reference :

		ULP-PRO-C-033-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AreaEvent_SET_initiated AND ics_GeoTargetArea AND ics_AreaId AND ics_AGPSSETassisted_SET_initiated


	 Test Procedure :

		Test 1: A-GPS SET assisted
		Case 2: Inside event type
		Details of cellular scenarios to be used and figures showing locations to aid

		understanding of test cases:
		In all cases the SET specifies the &#8220;Tokyo&#8221; Geographical target area and the

		SLP converts this into the Cell ID that is normally
		Case 2: Inside event type
		The SET camps on the GSM or WCDMA Cell ID that is normally used for
		testing and that is present in the Area ID list.

		1. Start a SI Area Event Triggered Session with the following values set

		in the application running on the SET or otherwise:
		 Area Event Type:
		o Case 2: Inside event type
		 Repeated reporting
		o Minimum Interval Time: 60 seconds
		o Maximum Number of Reports: 4
		 Start Time: If supported: 30 seconds
		 Stop Time: If supported:
		o Case 2 and Case 3: 120 seconds
		 Geographic Target Area List with:
		o Geographic Target Area set to:
		 Circular with:
		 Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.75
		degrees East
		 Radius set to: 1000 meters
		 Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred on the
		coordinates of the GPS &#8220;Tokyo&#8221; scenario
		specified in [3GPP TS 34.108]
		 Area Id Lists not set

		2. The SET sends SUPL TRIGGERED START with:
		 Trigger Type set to Area Event
		 The details of the Reporting Capability parameter consistent
		with the known reporting capabilities supported by the SET.
		 If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters are consistent with the
		known reporting capabilities supported by the SET.

		3. Send SUPL TRIGGERED RESPONSE with:
		 Positioning Method set to A-GPS SET assisted.
		 Trigger Params set to Area Event Params with:
		o Area Event Type:
		 Case 2: Inside event type
		o Location estimate: True
		o Repeated reporting not set
		o Geographic Target Area List not set
		o Area Id List with:
		 Area Id Set set to one of the following,
		depending on the technology being used for
		testing:
		 GSM Area Id with: Cell Global
		Identity set to value normally used
		during testing with GSM and
		Mobile Country Code, Mobile
		Network Code and Location Area
		Code not set
		 WCDMA Area Id with: Cell
		Identity set to value normally used
		during testing with WCDMA and
		Mobile Country Code, Mobile
		Network Code and Location Area
		Code not set
		 Area Id Set Type and Geographic Area
		Mapping List not set
		Note that the SET may release the secure connection at this point.

		4. At some time:
		Case 2 and Case 3:
		 - The SET responds with SUPL POS INIT and a SUPL POS
		session takes place
		 - The SUPL POS Session completes successfully
		 - Send SUPL REPORT with the correctly calculated position.
		Note that the SET may release the secure connection at this point.

		5. After at least 30 seconds (set by Start Time) after step 2, or
		immediately after step 4 if Start Time is not supported:
		 - Case 2: The SET displays the calculated position estimate as
		Inside event has been met

		6. At some time:
		Case 2 and Case 3:
		 - The SET responds with SUPL POS INIT and a SUPL POS
		session takes place
		 - The SUPL POS Session completes successfully
		 - Send SUPL REPORT with the correctly calculated position.
		Note that the SET may release the secure connection at this point.

		7. After at least 60 seconds (set by Minimum Interval Time) after step 5:

		 - Case 2: The SET displays the calculated position estimate as
		Inside event has been met

		8. Case 2 and Case 3:
		If Stop Time is supported, the SET sends SUPL END approximately
		120 seconds (set by Stop Time) after step 2. Note that one more
		sequence as detailed below may take place before this occurs.
		If Stop Time is not supported the following sequence takes place
		repeatedly until the SET has displayed the remaining number of position

		estimates (the total number set by Maximum Number of Reports), and
		then the SET sends SUPL END
		At some time:
		- The SET responds with SUPL POS INIT and a SUPL POS
		session takes place
		- The SUPL POS Session completes successfully
		- Send SUPL REPORT with the correctly calculated position.
		Note that the SET may release the secure connection at this point.
		Case 2: After at least 60 seconds (set by Minimum Interval Time) after

		the display of the previous position estimate, the SET displays the
		calculated position estimate as Inside event has been met


	Pass-Criteria :

		1. At step 2:
		- The Trigger Type shall be set to Area Event
		- The details of the Reporting Capability parameter shall be
		consistent with the known Reporting capabilities supported by
		the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters shall be consistent with the
		known reporting capabilities supported by the SET.

		2. At step 4: Case 2 and Case 3 the SET shall respond with SUPL POS
		INIT and a SUPL POS session shall take place and complete
		successfully.

		3. At step 5: Case 2 and Case 3 the SET shall display the calculated
		position estimate after at least 30 seconds after step 2 or immediately

		after step 4 if Start Time is not supported
		4. At step 6: Case 2 and Case 3 the SET shall respond with SUPL POS
		INIT and a SUPL POS session shall take place and complete
		successfully.

		5. At step 7: Case 2 and Case 3 the SET shall display the calculated
		position estimate after at least 60 seconds after step 5

		6. At step 8: Case 2 and Case 3:
		If Stop Time is supported the SET shall send SUPL END approximately
		120 seconds after step 2.
		If Stop Time is not supported the following shall take place repeatedly

		until the SET has displayed the remaining number of position estimates,

		and then the SET shall send SUPL END
		- The SET shall respond with SUPL POS INIT and a SUPL POS
		session shall take place and complete successfully.
		- After at least 60 seconds after the display of the previous
		position estimate, the SET shall display the calculated position
		estimate</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_131_1_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting using Area ID generated by the SLP - 
 Test 1: A-GPS SET assisted,
 Case 3: Outside event type
SUPL-2.0-con-131-1-3
	TP version:

	Test Case Id :

		SUPL-2.0-con-131

	Test Object :

		Client

	Test Case Description :

		To test SET correctly performs Area Event reporting using Area ID generated by the SLP: MS Assisted


	Specification Reference :

		ULP TS 5.2.9

	SCR Reference :

		ULP-PRO-C-033-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AreaEvent_SET_initiated AND ics_GeoTargetArea AND ics_AreaId AND ics_AGPSSETassisted_SET_initiated


	 Test Procedure :

		Test 1: A-GPS SET assisted
		Case 3: Outside event type
		Details of cellular scenarios to be used and figures showing locations to aid

		understanding of test cases:
		In all cases the SET specifies the &#8220;Tokyo&#8221; Geographical target area and the

		SLP converts this into the Cell ID that is normally
		Case 3: Outside event type
		The SET camps on a GSM or WCDMA Cell ID that is not normally used for
		testing and that is not present in Area ID list.
		The cell that is normally used for testing is present in the Area ID List.


		1. Start a SI Area Event Triggered Session with the following values set

		in the application running on the SET or otherwise:
		 Area Event Type:
		o Case 3: Outside event type
		 Repeated reporting
		o Minimum Interval Time: 60 seconds
		o Maximum Number of Reports: 4
		 Start Time: If supported: 30 seconds
		 Stop Time: If supported:
		o Case 2 and Case 3: 120 seconds
		 Geographic Target Area List with:
		o Geographic Target Area set to:
		 Circular with:
		 Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.75
		degrees East
		 Radius set to: 1000 meters
		 Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred on the
		coordinates of the GPS &#8220;Tokyo&#8221; scenario
		specified in [3GPP TS 34.108]
		 Area Id Lists not set

		2. The SET sends SUPL TRIGGERED START with:
		 Trigger Type set to Area Event
		 The details of the Reporting Capability parameter consistent
		with the known reporting capabilities supported by the SET.
		 If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters are consistent with the
		known reporting capabilities supported by the SET.

		3. Send SUPL TRIGGERED RESPONSE with:
		 Positioning Method set to A-GPS SET assisted.
		 Trigger Params set to Area Event Params with:
		o Area Event Type:
		 Case 3: Outside event type
		o Location estimate: True
		o Repeated reporting not set
		o Geographic Target Area List not set
		o Area Id List with:
		 Area Id Set set to one of the following,
		depending on the technology being used for
		testing:
		 GSM Area Id with: Cell Global
		Identity set to value normally used
		during testing with GSM and
		Mobile Country Code, Mobile
		Network Code and Location Area
		Code not set
		 WCDMA Area Id with: Cell
		Identity set to value normally used
		during testing with WCDMA and
		Mobile Country Code, Mobile
		Network Code and Location Area
		Code not set
		 Area Id Set Type and Geographic Area
		Mapping List not set
		Note that the SET may release the secure connection at this point.

		4. At some time:
		Case 2 and Case 3:
		 - The SET responds with SUPL POS INIT and a SUPL POS
		session takes place
		 - The SUPL POS Session completes successfully
		 - Send SUPL REPORT with the correctly calculated position.
		Note that the SET may release the secure connection at this point.

		5. After at least 30 seconds (set by Start Time) after step 2, or
		immediately after step 4 if Start Time is not supported:
		 - Case 3: The SET displays the calculated position estimate as
		Outside event has been met

		6. At some time:
		Case 2 and Case 3:
		 - The SET responds with SUPL POS INIT and a SUPL POS
		session takes place
		 - The SUPL POS Session completes successfully
		 - Send SUPL REPORT with the correctly calculated position.
		Note that the SET may release the secure connection at this point.

		7. After at least 60 seconds (set by Minimum Interval Time) after step 5:

		- Case 3: The SET displays the calculated position estimate as
		Outside event has been met

		8. Case 2 and Case 3:
		If Stop Time is supported, the SET sends SUPL END approximately
		120 seconds (set by Stop Time) after step 2. Note that one more
		sequence as detailed below may take place before this occurs.
		If Stop Time is not supported the following sequence takes place
		repeatedly until the SET has displayed the remaining number of position

		estimates (the total number set by Maximum Number of Reports), and
		then the SET sends SUPL END
		At some time:
		- The SET responds with SUPL POS INIT and a SUPL POS
		session takes place
		- The SUPL POS Session completes successfully
		- Send SUPL REPORT with the correctly calculated position.
		Note that the SET may release the secure connection at this point.
		Case 3: After at least 60 seconds (set by Minimum Interval Time) after

		the display of the previous position estimate, the SET displays the
		calculated position estimate as Outside event has been met


	Pass-Criteria :

		1. At step 2:
		- The Trigger Type shall be set to Area Event
		- The details of the Reporting Capability parameter shall be
		consistent with the known Reporting capabilities supported by
		the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters shall be consistent with the
		known reporting capabilities supported by the SET.

		2. At step 4: Case 2 and Case 3 the SET shall respond with SUPL POS
		INIT and a SUPL POS session shall take place and complete
		successfully.

		3. At step 5: Case 2 and Case 3 the SET shall display the calculated
		position estimate after at least 30 seconds after step 2 or immediately

		after step 4 if Start Time is not supported

		4. At step 6: Case 2 and Case 3 the SET shall respond with SUPL POS
		INIT and a SUPL POS session shall take place and complete
		successfully.

		5. At step 7: Case 2 and Case 3 the SET shall display the calculated
		position estimate after at least 60 seconds after step 5

		6. At step 8: Case 2 and Case 3:
		If Stop Time is supported the SET shall send SUPL END approximately
		120 seconds after step 2.
		If Stop Time is not supported the following shall take place repeatedly

		until the SET has displayed the remaining number of position estimates,

		and then the SET shall send SUPL END
		- The SET shall respond with SUPL POS INIT and a SUPL POS
		session shall take place and complete successfully.
		- After at least 60 seconds after the display of the previous
		position estimate, the SET shall display the calculated position
		estimate</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_131_1_4" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting using Area ID generated by the SLP - 
 Test 1: A-GPS SET assisted,
 Case 4: Leaving event type
SUPL-2.0-con-131-1-4
	TP version:

	Test Case Id :

		SUPL-2.0-con-131

	Test Object :

		Client

	Test Case Description :

		To test SET correctly performs Area Event reporting using Area ID generated by the SLP: MS Assisted


	Specification Reference :

		ULP TS 5.2.9

	SCR Reference :

		ULP-PRO-C-033-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AreaEvent_SET_initiated AND ics_GeoTargetArea AND ics_AreaId AND ics_AGPSSETassisted_SET_initiated


	 Test Procedure :

		Test 1: A-GPS SET assisted
		Case 4: Leaving event type
		Details of cellular scenarios to be used and figures showing locations to aid

		understanding of test cases:
		In all cases the SET specifies the &#8220;Tokyo&#8221; Geographical target area and the

		SLP converts this into the Cell ID that is normally
		Case 4: Leaving event type
		The SET camps on the GSM or WCDMA Cell ID that is normally used for
		testing and that is present in Area ID list. The SET then handsover to a cell

		that is not normally used for testing and that is not present in the Area ID

		List.

		1. Start a SI Area Event Triggered Session with the following values set

		in the application running on the SET or otherwise:
		 Area Event Type:
		o Case 4: Leaving event type
		 Repeated reporting
		o Minimum Interval Time: 60 seconds
		o Maximum Number of Reports: 4
		 Start Time: If supported: 30 seconds
		 Stop Time: If supported:
		o Case 1 and Case 4: 240 seconds
		 Geographic Target Area List with:
		o Geographic Target Area set to:
		 Circular with:
		 Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.75
		degrees East
		 Radius set to: 1000 meters
		 Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred on the
		coordinates of the GPS &#8220;Tokyo&#8221; scenario
		specified in [3GPP TS 34.108]
		 Area Id Lists not set

		2. The SET sends SUPL TRIGGERED START with:
		 Trigger Type set to Area Event
		 The details of the Reporting Capability parameter consistent
		with the known reporting capabilities supported by the SET.
		 If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters are consistent with the
		known reporting capabilities supported by the SET.

		3. Send SUPL TRIGGERED RESPONSE with:
		 Positioning Method set to A-GPS SET assisted.
		 Trigger Params set to Area Event Params with:
		o Area Event Type:
		 Case 4: Leaving event type
		o Location estimate: True
		o Repeated reporting not set
		o Geographic Target Area List not set
		o Area Id List with:
		 Area Id Set set to one of the following,
		depending on the technology being used for
		testing:
		 GSM Area Id with: Cell Global
		Identity set to value normally used
		during testing with GSM and
		Mobile Country Code, Mobile
		Network Code and Location Area
		Code not set
		 WCDMA Area Id with: Cell
		Identity set to value normally used
		during testing with WCDMA and
		Mobile Country Code, Mobile
		Network Code and Location Area
		Code not set
		 Area Id Set Type and Geographic Area
		Mapping List not set
		Note that the SET may release the secure connection at this point.

		4. At some time:
		Case 1 and Case 4:
		 - Case 4: The SET does not respond as Leaving event has not
		been met

		5. Do nothing (Applies only to Case 2 and Case 3)

		6. At some time:
		 - Case 4: The SET does not respond as Leaving event has not
		been met

		7. Do nothing (Applies only to Case 2 and Case 3)

		8. Do nothing (Applies only to Case 2 and Case 3)

		9. Case 1 and Case 4:
		120 seconds after step 2:
		Case 4: force a cellular handover to a GSM or WCDMA Cell ID that is
		not normally used for testing.

		10. Case 1 and Case 4:
		At some time:
		- The SET responds with SUPL POS INIT and a SUPL POS
		session takes place
		- The SUPL POS Session completes successfully
		- Send SUPL REPORT with the correctly calculated position.
		Note that the SET may release the secure connection at this point.

		11. Case 1 and Case 4:
		Case 4: The SET displays the calculated position estimate as Leaving
		event has been met.

		12. Case 1 and Case 4:
		If Stop Time is supported, the SET sends SUPL END approximately
		240 seconds (set by Stop Time) after step 2.
		If Stop Time is not supported, 240 seconds after step 2 send SUPL
		TRIGGERED STOP (to terminate the test)

	Pass-Criteria :

		1. At step 2:
		- The Trigger Type shall be set to Area Event
		- The details of the Reporting Capability parameter shall be
		consistent with the known Reporting capabilities supported by
		the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters shall be consistent with the
		known reporting capabilities supported by the SET.

		Test 1:
		2. At step 4:
		Case 1 and Case 4 the SET shall not respond

		4. At step 6:
		Case 1 and Case 4 the SET shall not respond

		5. At step 7: Case 2 and Case 3 the SET shall display the calculated
		position estimate after at least 60 seconds after step 5

		7. At step 10: Case 1 and Case 4 the SET shall respond with SUPL POS
		INIT and a SUPL POS session shall take place and complete
		successfully

		8. At step 11: Case 1 and Case 4 the SET shall display the calculated
		position estimate

		9. At step 12: Case 1 and Case 4 if Stop Time is supported, the SET
		shall send SUPL END approximately 240 seconds after step 2.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_131_2_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting using Area ID generated by the SLP - 
 Test 2: A-GPS SET based,
 Case 1: Entering event type
SUPL-2.0-con-131-2-1
	TP version:

	Test Case Id :

		SUPL-2.0-con-131

	Test Object :

		Client

	Test Case Description :

		To test SET correctly performs Area Event reporting using Area ID generated by the SLP: MS Based


	Specification Reference :

		ULP TS 5.2.9

	SCR Reference :

		ULP-PRO-C-033-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AreaEvent_SET_initiated AND ics_GeoTargetArea AND ics_AreaId AND ics_AGPSSETbased_SET_initiated


	 Test Procedure :

		Test 2: A-GPS SET based
		Case 1: Entering event type
		Details of cellular scenarios to be used and figures showing locations to aid

		understanding of test cases:
		In all cases the SET specifies the &#8220;Tokyo&#8221; Geographical target area and the

		SLP converts this into the Cell ID that is normally
		Case 1: Entering event type
		The SET camps on a GSM or WCDMA Cell ID that is not normally used for
		testing and that is not present in Area ID list. The SET then handsover to the

		cell that is normally used for testing and that is present in the Area ID List.


		1. Start a SI Area Event Triggered Session with the following values set

		in the application running on the SET or otherwise:
		 Area Event Type:
		o Case 1: Entering event type
		 Repeated reporting
		o Minimum Interval Time: 60 seconds
		o Maximum Number of Reports: 4
		 Start Time: If supported: 30 seconds
		 Stop Time: If supported:
		o Case 1 and Case 4: 240 seconds
		 Geographic Target Area List with:
		o Geographic Target Area set to:
		 Circular with:
		 Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.75
		degrees East
		 Radius set to: 1000 meters
		 Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred on the
		coordinates of the GPS &#8220;Tokyo&#8221; scenario
		specified in [3GPP TS 34.108]
		 Area Id Lists not set

		2. The SET sends SUPL TRIGGERED START with:
		 Trigger Type set to Area Event
		 The details of the Reporting Capability parameter consistent
		with the known reporting capabilities supported by the SET.
		 If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters are consistent with the
		known reporting capabilities supported by the SET.

		3. Send SUPL TRIGGERED RESPONSE with:
		 Positioning Method set to A-GPS SET based.
		 Trigger Params set to Area Event Params with:
		o Area Event Type:
		 Case 1: Entering event type
		o Location estimate: True
		o Repeated reporting not set
		o Geographic Target Area List not set
		o Area Id List with:
		 Area Id Set set to one of the following,
		depending on the technology being used for
		testing:
		 GSM Area Id with: Cell Global
		Identity set to value normally used
		during testing with GSM and
		Mobile Country Code, Mobile
		Network Code and Location Area
		Code not set
		 WCDMA Area Id with: Cell
		Identity set to value normally used
		during testing with WCDMA and
		Mobile Country Code, Mobile
		Network Code and Location Area
		Code not set
		 Area Id Set Type and Geographic Area
		Mapping List not set
		Note that the SET may release the secure connection at this point.

		14. At any time during the following part of the test when the SET is
		required to make a position estimate, if the SET requires Assistance
		Data, then:
		- The SET responds with SUPL POS INIT
		- A SUPL POS session takes place and completes successfully
		- Send SUPL REPORT with no parameters.
		Note that the SET may release the secure connection at this point.

		15. After at least 30 seconds (set by Start Time) after step 2, or
		immediately after step 3 if Start Time is not supported:
		- Case 1: The SET does not respond as Entering event has not
		been met.

		16. After at least 60 seconds (set by Minimum Interval Time) after step

		15:
		- Case 1: The SET does not respond as Entering event has not
		been met.

		17. Do nothing (Applies only to Case 2 and Case 3)

		18. Case 1 and Case 4:
		120 seconds after step 3:
		Case 1: force a cellular handover to the GSM or WCDMA Cell ID that
		is normally used for testing.

		19. Case 1 and Case 4:
		Case 1: The SET displays the calculated position estimate as Entering
		event has been met.

		20. Case 1 and Case 4:
		If Stop Time is supported, the SET sends SUPL END approximately
		240 seconds (set by Stop Time) after step 2.
		If Stop Time is not supported, 240 seconds after step 2 send SUPL
		TRIGGERED STOP (to terminate the test)

	Pass-Criteria :

		1. At step 2:
		- The Trigger Type shall be set to Area Event
		- The details of the Reporting Capability parameter shall be
		consistent with the known Reporting capabilities supported by
		the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters shall be consistent with the
		known reporting capabilities supported by the SET.

		10. At step 15: Case 1and Case 4: The SET shall not display the
		position estimate.

		11. At step 16: Case 1 and Case 4 the SET shall not respond

		13: At step 19: Case 1 and Case 4 the SET shall display the calculated

		position estimate.

		14. At step 20: Case 1 and Case 4 if Stop Time is supported, the SET
		shall send SUPL END approximately 240 seconds after step 2</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_131_2_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting using Area ID generated by the SLP - 
 Test 2: A-GPS SET based,
 Case 2: Inside event type
SUPL-2.0-con-131-2-2
	TP version:

	Test Case Id :

		SUPL-2.0-con-131

	Test Object :

		Client

	Test Case Description :

		To test SET correctly performs Area Event reporting using Area ID generated by the SLP: MS Based


	Specification Reference :

		ULP TS 5.2.9

	SCR Reference :

		ULP-PRO-C-033-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AreaEvent_SET_initiated AND ics_GeoTargetArea AND ics_AreaId AND ics_AGPSSETbased_SET_initiated


	 Test Procedure :

		Test 2: A-GPS SET based
		Case 2: Inside event type
		Details of cellular scenarios to be used and figures showing locations to aid

		understanding of test cases:
		In all cases the SET specifies the &#8220;Tokyo&#8221; Geographical target area and the

		SLP converts this into the Cell ID that is normally
		Case 1: Entering event type
		The SET camps on a GSM or WCDMA Cell ID that is not normally used for
		testing and that is not present in Area ID list. The SET then handsover to the

		cell that is normally used for testing and that is present in the Area ID List.

		Case 2: Inside event type
		The SET camps on the GSM or WCDMA Cell ID that is normally used for
		testing and that is present in the Area ID list.
		Figure 2: Case 2: SET is inside area

		1. Start a SI Area Event Triggered Session with the following values set

		in the application running on the SET or otherwise:
		 Area Event Type:
		o Case 2: Inside event type
		 Repeated reporting
		o Minimum Interval Time: 60 seconds
		o Maximum Number of Reports: 4
		 Start Time: If supported: 30 seconds
		 Stop Time: If supported:
		o Case 2 and Case 3: 120 seconds
		 Geographic Target Area List with:
		o Geographic Target Area set to:
		 Circular with:
		 Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.75
		degrees East
		 Radius set to: 1000 meters
		 Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred on the
		coordinates of the GPS &#8220;Tokyo&#8221; scenario
		specified in [3GPP TS 34.108]
		 Area Id Lists not set

		2. The SET sends SUPL TRIGGERED START with:
		 Trigger Type set to Area Event
		 The details of the Reporting Capability parameter consistent
		with the known reporting capabilities supported by the SET.
		 If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters are consistent with the
		known reporting capabilities supported by the SET.

		3. Send SUPL TRIGGERED RESPONSE with:
		 Positioning Method set to A-GPS SET based.
		 Trigger Params set to Area Event Params with:
		o Area Event Type:
		 Case 2: Inside event type
		o Location estimate: True
		o Repeated reporting not set
		o Geographic Target Area List not set
		o Area Id List with:
		 Area Id Set set to one of the following,
		depending on the technology being used for
		testing:
		 GSM Area Id with: Cell Global
		Identity set to value normally used
		during testing with GSM and
		Mobile Country Code, Mobile
		Network Code and Location Area
		Code not set
		 WCDMA Area Id with: Cell
		Identity set to value normally used
		during testing with WCDMA and
		Mobile Country Code, Mobile
		Network Code and Location Area
		Code not set
		 Area Id Set Type and Geographic Area
		Mapping List not set
		Note that the SET may release the secure connection at this point.

		14. At any time during the following part of the test when the SET is
		required to make a position estimate, if the SET requires Assistance
		Data, then:
		- The SET responds with SUPL POS INIT
		- A SUPL POS session takes place and completes successfully
		- Send SUPL REPORT with no parameters.
		Note that the SET may release the secure connection at this point.

		15. After at least 30 seconds (set by Start Time) after step 2, or
		immediately after step 3 if Start Time is not supported:
		- Case 2: The SET displays the calculated position estimate as
		Inside event has been met

		16. After at least 60 seconds (set by Minimum Interval Time) after step

		15:
		- Case 2: The SET displays the calculated position estimate as
		Inside event has been met

		17. Case 2 and Case 3:
		If Stop Time is supported, the SET sends SUPL END approximately
		120 seconds (set by Stop Time) after step 2. Note that one more display

		of the calculated position estimate as detailed below may take place
		before this occurs.
		If Stop Time is not supported the following takes place repeatedly until

		the SET has displayed the remaining number of position estimates (the
		total number set by Maximum Number of Reports), and then the SET
		sends SUPL END
		Case 2: After at least 60 seconds (set by Minimum Interval Time) after

		the display of the previous position estimate, the SET displays the
		calculated position estimate as Inside event has been met


	Pass-Criteria :

		1. At step 2:
		- The Trigger Type shall be set to Area Event
		- The details of the Reporting Capability parameter shall be
		consistent with the known Reporting capabilities supported by
		the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters shall be consistent with the
		known reporting capabilities supported by the SET.

		10. At step 15:
		Case 2 and Case 3 The SET shall display the calculated position
		estimate after at least 30 seconds after step 2 or immediately after step 3

		if Start Time is not supported

		11. At step 16:
		Case 2 and Case 3 the SET shall display the calculated position estimate

		after at least 60 seconds after step 15

		12. At step 17:
		Case 2 and Case 3: If Stop Time is supported the SET shall send SUPL END approximately

		120 seconds after step 2.
		If Stop Time is not supported the following shall take place repeatedly

		until the SET has displayed the remaining number of position estimates,

		and then the SET shall send SUPL END
		After at least 60 seconds after the display of the previous position
		estimate, the SET shall display the calculated position estimate</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_131_2_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting using Area ID generated by the SLP - 
 Test 2: A-GPS SET based,
 Case 3: Outside event type
SUPL-2.0-con-131-2-3
	TP version:

	Test Case Id :

		SUPL-2.0-con-131

	Test Object :

		Client

	Test Case Description :

		To test SET correctly performs Area Event reporting using Area ID generated by the SLP: MS Based


	Specification Reference :

		ULP TS 5.2.9

	SCR Reference :

		ULP-PRO-C-033-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AreaEvent_SET_initiated AND ics_GeoTargetArea AND ics_AreaId AND ics_AGPSSETbased_SET_initiated


	 Test Procedure :

		Test 2: A-GPS SET based
		Case 3: Outside event type
		Details of cellular scenarios to be used and figures showing locations to aid

		understanding of test cases:
		In all cases the SET specifies the &#8220;Tokyo&#8221; Geographical target area and the

		SLP converts this into the Cell ID that is normally
		Case 3: Outside event type
		The SET camps on a GSM or WCDMA Cell ID that is not normally used for
		testing and that is not present in Area ID list.
		The cell that is normally used for testing is present in the Area ID List.


		1. Start a SI Area Event Triggered Session with the following values set

		in the application running on the SET or otherwise:
		 Area Event Type:
		o Case 3: Outside event type
		 Repeated reporting
		o Minimum Interval Time: 60 seconds
		o Maximum Number of Reports: 4
		 Start Time: If supported: 30 seconds
		 Stop Time: If supported:
		o Case 2 and Case 3: 120 seconds
		 Geographic Target Area List with:
		o Geographic Target Area set to:
		 Circular with:
		 Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.75
		degrees East
		 Radius set to: 1000 meters
		 Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred on the
		coordinates of the GPS &#8220;Tokyo&#8221; scenario
		specified in [3GPP TS 34.108]
		 Area Id Lists not set

		2. The SET sends SUPL TRIGGERED START with:
		 Trigger Type set to Area Event
		 The details of the Reporting Capability parameter consistent
		with the known reporting capabilities supported by the SET.
		 If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters are consistent with the
		known reporting capabilities supported by the SET.
		3. Send SUPL TRIGGERED RESPONSE with:
		 Positioning Method set to A-GPS SET based.
		 Trigger Params set to Area Event Params with:
		o Area Event Type:
		 Case 3: Outside event type
		o Location estimate: True
		o Repeated reporting not set
		o Geographic Target Area List not set
		o Area Id List with:
		 Area Id Set set to one of the following,
		depending on the technology being used for
		testing:
		 GSM Area Id with: Cell Global
		Identity set to value normally used
		during testing with GSM and
		Mobile Country Code, Mobile
		Network Code and Location Area
		Code not set
		 WCDMA Area Id with: Cell
		Identity set to value normally used
		during testing with WCDMA and
		Mobile Country Code, Mobile
		Network Code and Location Area
		Code not set
		 Area Id Set Type and Geographic Area
		Mapping List not set
		Note that the SET may release the secure connection at this point.

		14. At any time during the following part of the test when the SET is
		required to make a position estimate, if the SET requires Assistance
		Data, then:
		- The SET responds with SUPL POS INIT
		- A SUPL POS session takes place and completes successfully
		- Send SUPL REPORT with no parameters.
		Note that the SET may release the secure connection at this point.
		15. After at least 30 seconds (set by Start Time) after step 2, or
		immediately after step 3 if Start Time is not supported:
		- Case 3: The SET displays the calculated position estimate as
		Outside event has been met

		16. After at least 60 seconds (set by Minimum Interval Time) after step

		15:
		- Case 3: The SET displays the calculated position estimate as
		Outside event has been met

		17. Case 2 and Case 3:
		If Stop Time is supported, the SET sends SUPL END approximately
		120 seconds (set by Stop Time) after step 2. Note that one more display

		of the calculated position estimate as detailed below may take place
		before this occurs.
		If Stop Time is not supported the following takes place repeatedly until

		the SET has displayed the remaining number of position estimates (the
		total number set by Maximum Number of Reports), and then the SET
		sends SUPL END
		Case 3: After at least 60 seconds (set by Minimum Interval Time) after

		the display of the previous position estimate, the SET displays the
		calculated position estimate as Outside event has been met


	Pass-Criteria :

		1. At step 2:
		- The Trigger Type shall be set to Area Event
		- The details of the Reporting Capability parameter shall be
		consistent with the known Reporting capabilities supported by
		the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters shall be consistent with the
		known reporting capabilities supported by the SET.

		10. At step 15:
		Case 2 and Case 3 The SET shall display the calculated position
		estimate after at least 30 seconds after step 2 or immediately after step 3

		if Start Time is not supported

		11. At step 16:
		Case 2 and Case 3 the SET shall display the calculated position estimate

		after at least 60 seconds after step 15

		12. At step 17: Case 2 and Case 3:
		If Stop Time is supported the SET shall send SUPL END approximately
		120 seconds after step 2.
		If Stop Time is not supported the following shall take place repeatedly

		until the SET has displayed the remaining number of position estimates,

		and then the SET shall send SUPL END
		After at least 60 seconds after the display of the previous position
		estimate, the SET shall display the calculated position estimate</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_131_2_4" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly performs Area Event reporting using Area ID generated by the SLP - 
 Test 2: A-GPS SET based,
 Case 4: Leaving event type
SUPL-2.0-con-131-2-4
	TP version:

	Test Case Id :

		SUPL-2.0-con-131

	Test Object :

		Client

	Test Case Description :

		To test SET correctly performs Area Event reporting using Area ID generated by the SLP: MS Based


	Specification Reference :

		ULP TS 5.2.9

	SCR Reference :

		ULP-PRO-C-033-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_AreaEvent_SET_initiated AND ics_GeoTargetArea AND ics_AreaId AND ics_AGPSSETbased_SET_initiated


	 Test Procedure :

		Test 2: A-GPS SET based
		Case 4: Leaving event type
		Details of cellular scenarios to be used and figures showing locations to aid

		understanding of test cases:
		In all cases the SET specifies the &#8220;Tokyo&#8221; Geographical target area and the

		SLP converts this into the Cell ID that is normally
		Case 4: Leaving event type
		The SET camps on the GSM or WCDMA Cell ID that is normally used for
		testing and that is present in Area ID list. The SET then handsover to a cell

		that is not normally used for testing and that is not present in the Area ID

		List.

		1. Start a SI Area Event Triggered Session with the following values set

		in the application running on the SET or otherwise:
		 Area Event Type:
		o Case 4: Leaving event type
		 Repeated reporting
		o Minimum Interval Time: 60 seconds
		o Maximum Number of Reports: 4
		 Start Time: If supported: 30 seconds
		 Stop Time: If supported:
		o Case 1 and Case 4: 240 seconds
		 Geographic Target Area List with:
		o Geographic Target Area set to:
		 Circular with:
		 Coordinate set to:
		o latitude set to: 35.666667
		degrees North
		o longitude set to: 139.75
		degrees East
		 Radius set to: 1000 meters
		 Radius-min radius and Radius-max
		radius not set or set to 1 meter
		Note that this is an area centred on the
		coordinates of the GPS &#8220;Tokyo&#8221; scenario
		specified in [3GPP TS 34.108]
		 Area Id Lists not set

		2. The SET sends SUPL TRIGGERED START with:
		 Trigger Type set to Area Event
		 The details of the Reporting Capability parameter consistent
		with the known reporting capabilities supported by the SET.
		 If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters are consistent with the
		known reporting capabilities supported by the SET.
		3. Send SUPL TRIGGERED RESPONSE with:
		 Positioning Method set to A-GPS SET based.
		 Trigger Params set to Area Event Params with:
		o Area Event Type:
		 Case 4: Leaving event type
		o Location estimate: True
		o Repeated reporting not set
		o Geographic Target Area List not set
		o Area Id List with:
		 Area Id Set set to one of the following,
		depending on the technology being used for
		testing:
		 GSM Area Id with: Cell Global
		Identity set to value normally used
		during testing with GSM and
		Mobile Country Code, Mobile
		Network Code and Location Area
		Code not set
		 WCDMA Area Id with: Cell
		Identity set to value normally used
		during testing with WCDMA and
		Mobile Country Code, Mobile
		Network Code and Location Area
		Code not set
		 Area Id Set Type and Geographic Area
		Mapping List not set
		Note that the SET may release the secure connection at this point.

		14. At any time during the following part of the test when the SET is
		required to make a position estimate, if the SET requires Assistance
		Data, then:
		- The SET responds with SUPL POS INIT
		- A SUPL POS session takes place and completes successfully
		- Send SUPL REPORT with no parameters.
		Note that the SET may release the secure connection at this point.
		15. After at least 30 seconds (set by Start Time) after step 2, or
		immediately after step 3 if Start Time is not supported:
		- Case 4: The SET does not respond as Leaving event has not
		been met

		16. After at least 60 seconds (set by Minimum Interval Time) after step

		15:
		- Case 4: The SET does not respond as Leaving event has not
		been met

		17. Do nothing (Only applies to Case 2 and Case 3)

		18. Case 1 and Case 4:
		120 seconds after step 3:
		Case 4: force a cellular handover to a GSM or WCDMA Cell ID that is
		not normally used for testing.

		19. Case 1 and Case 4:
		Case 4: The SET displays the calculated position estimate as Leaving
		event has been met.

		20. Case 1 and Case 4:
		If Stop Time is supported, the SET sends SUPL END approximately
		240 seconds (set by Stop Time) after step 2.
		If Stop Time is not supported, 240 seconds after step 2 send SUPL
		TRIGGERED STOP (to terminate the test)

	Pass-Criteria :

		1. At step 2:
		- The Trigger Type shall be set to Area Event
		- The details of the Reporting Capability parameter shall be
		consistent with the known Reporting capabilities supported by
		the SET.
		- If the SET sends the Service Capabilities parameter in the SET
		Capabilities then the details of the Services Supported and the
		Reporting Capabilities parameters shall be consistent with the
		known reporting capabilities supported by the SET.

		10. At step 15: Case 1and Case 4: The SET shall not display the
		position estimate.

		11. At step 16: Case 1 and Case 4 the SET shall not respond

		13: At step 19: Case 1 and Case 4 the SET shall display the calculated

		position estimate.

		14. At step 20: Case 1 and Case 4 if Stop Time is supported, the SET
		shall send SUPL END approximately 240 seconds after step 2</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_140_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-140 - Timeout UT1 - Test 1 - Immediate session.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_140_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions timer UT1 - 
 Test 2: Triggered Session
SUPL-2.0-con-140-2
	TP version:

	Test Case Id :

		SUPL-2.0-con-140

	Test Object :

		Client

	Test Case Description :

		To test SET correctly actions timer UT1

	Specification Reference :

		ULP TS Appendix D

	SCR Reference :

		ULP-PRO-C-009-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_periodic_SET_initiated OR ics_event_SET_initiated

	Test Procedure :

		Test 2: Triggered session [Includes Optional Features]
		6. Start a SI Periodic Triggered Location Session,
		or a SI Area Event Triggered Location session if Periodic Location sessions are

		not supported in the SET.
		7. The SET sends SUPL TRIGGERED START
		8. Do not respond
		9. After timer UT1 expires (depending on ixit_timer_UT1) the SET sends SUPL END with:

		Status Code not sent or set to any of:&#160;
		unspecified, systemFailure or posMethodFailure.
		10. The Location Session ends and the SET releases the secure IP connection.


	Pass-Criteria :

		1. At step 4 and step 9 the SET shall respond with SUPL END with:
		Status Code not sent or set to any of:
		unspecified, systemFailure or posMethodFailure.
		2. At step 5 and step 10 the SET shall release the secure IP connection.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_141_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-141 - Timeout UT2 - Test 1 - SUPL POS session (Immediate session).</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_141_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions timer UT2 - 
 Test 2: SUPL POS session (Triggered session)
SUPL-2.0-con-141-2
	TP version:

	Test Case Id :

		SUPL-2.0-con-141

	Test Object :

		Client

	Test Case Description :

		To test SET correctly actions timer UT2

	Specification Reference :

		ULP TS Appendix D

	SCR Reference :

		ULP-PRO-C-009-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		 (ics_AGPSSETassisted_SET_initiated OR ics_AGPSSETbased_SET_initiated OR [others FFS]) AND (ics_periodic_SET_initiated OR ics_event_SET_initiated)


	Test Procedure :

		Test 2: SUPL POS session (Triggered session) [Includes optional features]

		Note: This test case is applicable to SETs that support any location
		method that requires a SUPL POS session and that supports any triggered service.

		This test case has been written for a Periodic Triggered, SET assisted mode Location Session.

		The case where Periodic Location sessions or a SET assisted mode is not supported in the SET

		 is FFS
		8. Start a SI Periodic Triggered Location Session
		9. The SET sends SUPL TRIGGERED START
		10. Send SUPL TRIGGERED RESPONSE with:
		Positioning Method set to any SET assisted method that requires a SUPL POS session that

		 is supported by the SET
		11. When the first periodic trigger occurs the SET sends SUPL POS INIT

		12. Do not respond
		13. (After timer UT2 expires (depending on ixit_timer_UT2) the SET will abandon the SUPL POS session)

		Note that the SET may release the secure connection at this time.
		14. When the second periodic trigger occurs the SET sends SUPL POS INIT

		15. A SUPL POS session takes place
		16. Send SUPL REPORT
		17. The Triggered Location Session can be allowed to continue,
		or send SUPL TRIGGERED STOP to terminate the session


	Pass-Criteria :

		Test 2 and Test 4:
		3. At step 14 and step 31 the SET shall send SUPL POS INIT</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_141_3" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions timer UT2 - 
 Test 3: No SUPL POS session
SUPL-2.0-con-141-3
	TP version:

	Test Case Id :

		SUPL-2.0-con-141

	Test Object :

		Client

	Test Case Description :

		To test SET correctly actions timer UT2

	Specification Reference :

		ULP TS Appendix D

	SCR Reference :

		ULP-PRO-C-009-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Test Procedure :

		Test 3: No SUPL POS session (Immediate session)
		18. Start a SI Location Session
		19. The SET sends SUPL START
		20. Send SUPL RESPONSE with:
		 Positioning Method set to Enhanced Cell/sector
		21. The SET sends SUPL POS INIT
		22. Do not respond
		23. After timer UT2 expires (depending on ixit_timer_UT2)&#160; the SET sends SUPL END with:

		 Status Code not sent or set to any of:
		unspecified, systemFailure or posMethodFailure.
		24. The Location Session ends and the SET releases the secure IP connection.



	Pass-Criteria :

		Test 1 and Test 3:
		 1. At step 6 and step 23 the SET shall respond with SUPL END with:

		Status Code not sent or set to any of: unspecified, systemFailure or posMethodFailure.

		2. At step 7 and step 24 the SET shall release the secure IP connection.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_141_4" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions timer UT2 - 
 Test 4: No SUPL POS session (Triggered session)
SUPL-2.0-con-141-4
	TP version:

	Test Case Id :

		SUPL-2.0-con-141

	Test Object :

		Client

	Test Case Description :

		To test SET correctly actions timer UT2

	Specification Reference :

		ULP TS Appendix D

	SCR Reference :

		ULP-PRO-C-009-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		ics_periodic_SET_initiated OR ics_event_SET_initiated

	Test Procedure :

		Test 4: No SUPL POS session (Triggered session) [Includes optional features]

		Note: This test case is applicable to SETs that support any triggered service.

		This test case has been written for a Periodic Triggered Location Session.

		The case where Periodic Location sessions is not supported in the SET is FFS

		25. Start a SI Periodic Triggered Location Session
		26. The SET sends SUPL TRIGGERED START
		27. Send SUPL TRIGGERED RESPONSE with:
		Positioning Method set to Enhanced Cell/sector
		28. When the first periodic trigger occurs the SET sends SUPL POS INIT

		29. Do not respond
		30. (After timer UT2 expires (depending on ixit_timer_UT2) the SET
		will abandon the individual location session)
		31. When the second periodic trigger occurs&#160; the SET sends SUPL POS INIT

		32. Send SUPL REPORT
		33. The Triggered Location Session can be allowed to continue,
		or send SUPL TRIGGERED STOP to terminate the session

	Pass-Criteria :

		Test 2 and Test 4:
		3. At step 14 and step 31 the SET shall send SUPL POS INIT</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_142_1" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>SUPL-2.0-con-142 - Timeout UT3 - Test 1 - Immediate session.</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_142_2" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions timer UT3 - 
 Test 2: Triggered Session
SUPL-2.0-con-142-2
	TP version:

	Test Case Id :

		SUPL-2.0-con-142

	Test Object :

		Client

	Test Case Description :

		To test SET correctly actions timer UT3

	Specification Reference :

		ULP TS Appendix D

	SCR Reference :

		ULP-PRO-C-009-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		 (ics_AGPSSETassisted_SET_initiated OR ics_AGPSSETbased_SET_initiated OR [others FFS]) AND (ics_periodic_SET_initiated OR ics_event_SET_initiated)


	Test Procedure :

		Test 2: Triggered session
		 Note: This test case is applicable to SETs that support any location method

		 that requires a SUPL POS session and that supports any triggered service.

		This test case has been written for a Periodic Triggered, SET assisted mode Location Session.

		The case where Periodic Location sessions or a SET assisted mode is not supported in the SET is FFS

		 9. Start a SI Periodic Triggered Location Session
		10. The SET sends SUPL TRIGGERED START
		11. Send SUPL TRIGGERED RESPONSE with:
		 Positioning Method set to any SET assisted method that requires a SUPL POS session

		 that is supported by the SET
		12. When the first periodic trigger occurs the SET sends SUPL POS INIT

		13. A SUPL POS session takes place
		14. After the SET sends the final SUPL POS do not respond
		15. (After timer UT3 expires (depending on ixit_timer_UT3) the SET
		will continue to the next trigger in the session)
		 Note that the SET may release the secure connection at this time.
		16. When the second periodic trigger occurs the SET sends SUPL POS INIT

		17. A SUPL POS session takes place
		18. Send SUPL REPORT
		19. The Triggered Location Session can be allowed to continue,
		or send SUPL TRIGGERED STOP to terminate the session

	Pass-Criteria :

		Test 2:
 3. At step 16 the SET shall send SUPL POS INIT</description>
    </testcase>
    <testcase ActionOnFail="continue" Module="SUPL_V2_SET_INITIATED_Tests" Name="TC_143" Retries="0" Runs="1" Selection="false" Status="stopped" Verdict="none">
      <description>To test SET correctly actions timer UT7
SUPL-2.0-con-143
	TP version:

	Test Case Id :

		SUPL-2.0-con-143

	Test Object :

		Client

	Test Case Description :

		To test SET correctly actions timer UT7

	Specification Reference :

		ULP TS Appendix D

	SCR Reference :

		ULP-PRO-C-009-O

	Tool :

		SUPL Client Conformance Test Tool

	Test code :

		Validated test code for this test case

	Preconditions :

		((ics_periodic_SET_initiated OR ics_event_SET_initiated) AND NOT (ics_periodic_Network_initiated OR ics_event_Network_initiated))

		 AND ixit_timer_UT7

	Test Procedure :

		1. Start a SI Periodic Triggered Location Session, or a SI Area Event Triggered Location

		 session if Periodic Location sessions are not supported in the SET.

		2. Allow the first trigger to occur (either periodic or area event)

		and the first location session to complete
		3. From the SET stop the Triggered Location Session
		4. The SET sends SUPL TRIGGERED STOP
		5 Do not respond
		6. After timer UT7 expires (depending on ixit_timer_UT7)&#160;
		the SET sends SUPL END with:
		Status Code not sent or set to any of: &#160;unspecified, systemFailure or posMethodFailure.

		7. The Triggered Location Session ends and the SET releases the secure IP connection.


	Pass-Criteria :

		1. At step 6 the SET shall respond with SUPL END with:
		Status Code not sent or set to any of:
		 unspecified, systemFailure or posMethodFailure.
		2. At step 7 the SET shall release the secure IP connection.</description>
    </testcase>
  </campaign>
</campaignloader>

